Advertisement
Quick Links
STEP
1. Unfold the pre-assembled panels and stand up on the floor, connect first panel to last panel using pre-attached
plastic rings. (NOTE: Corral can be arranged into a hexagon or a rectangle.)
2. Place the L-shaped lamp stand base on the inside of the corral and secure with zip ties through the holes of the
panel. Tighten zip ties to ensure the lamp stand base is secure.
STEP
02
ASSEMBLY INSTRUCTIONS:
01
CONNECTING THE LAST TWO
PANELS WITH THE PLASTIC RING
USE ZIP TIES TO SECURE
THE L SHAPED STAND BASE
TO THE PLASTIC PANELS
Advertisement
Summary of Contents for Harris Farms Chick Corral
- Page 1 ASSEMBLY INSTRUCTIONS: STEP CONNECTING THE LAST TWO PANELS WITH THE PLASTIC RING 1. Unfold the pre-assembled panels and stand up on the floor, connect first panel to last panel using pre-attached plastic rings. (NOTE: Corral can be arranged into a hexagon or a rectangle.) 2.
- Page 2 4. Place the feeder and waterer at the opposite end of the brooder away from the heat lamp. 5. Pine shavings are recommended as bedding for chicks 6. Keep bedding clean and dry. Replace bedding at least once per week. www.harrisfarmsllc.com Harris Farms, LLC | 7227 Haley Industrial Dr. | Nolensville, TN 37135...