Jackson 436DL Operating, Safety And Parts Manual page 8

OPTIONAL HOLD DOWN DEVICE #436 DL-200 OPERATING INSTRUCTIONS – CONTINUED
5. Turn hold down device handle/nut to tighten
chain. As you tighten the chain with the
handle/nut, check to ensure that the full length
of the chain tightens against the pipe.
(See photo 5).
NOTE: If the chain does not tighten before
you run out of adjustment, loosen the
handle/nut and place the next link of
the chain into the hook on the hold
down bracket. Be sure the hold down
bracket and chain are in line with the
V-head assembly to ensure the chain
remains tight. (See photos below).
Right Wrong
8
Photo 5