Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ambery MPV-16X
Summary of Contents for Ambery MPV-16X
- Page 1 9CH/16CH Split-Screen Video Processor User Manual 1 / 22...
-
Page 2: Table Of Contents
Directory Directory Directory Directory 1.System Features………………………………………………2 2. Rear Panel Installation………………………………………3 3. Front Key Operation…………………………………………4 4. Function description………………………………………..5 4.1Button ……………………………………….5 MENU / AUDIO 4.2 Button ………………………………………5 AUTO/ FREEZE 4.3 Button ………………………………………..5 ZOOM/MODE 4.4 Button ………………………………………...6 VCR / ENTER 4.5 Button M4-A / ▲ …………………………………………….6 4.6 Button M4-B / ▼... -
Page 3: System Features
1.System Features - 4 channel audio input,1 channel audio output (option) - Connects up to 4/8/16 Video Camera Adjustable Brightness, Contrast, Saturation, Hue and Sharpness - High Resolution 720X480 60Hz for NTSC 720X576 50Hz for PAL VGA(option): 1024x768 - Various Display Modes 4 /8/16 Split Mode Full Screen Mode PIP Screen Mode... -
Page 4: Rear Panel Installation
2.Rear Panel Installation e.g. 16 Split system ① ① ① ① Camera Connection Accept 16 loop composite video inputs from the camera. ② ② ② ② AUDIO IN Connection Accept 4 composite audio inputs from the camera. ③ ③ ③ ③ VCR IN / VCR OUT Connection Accept 1 composite video input for playback from the VCR. -
Page 5: Front Key Operation
3.Front Key Operation e.g. 16 Split system front panel Note: (*L) – Press key continuously more than one second to enter menu options. (**S) – Press key less than one second to enter menu options. MENU (*L) : Enter or Exit main menu mode. ⑴... -
Page 6: Function Description
⒁ ⒁ ⒁ ⒁ / FULL : Channel 6 ( channel 14) display 6/14 ⒂ ⒂ ⒂ ⒂ / FULL : Channel 7 ( channel 15) display 7/15 ⒃ ⒃ ⒃ ⒃ / FULL : Channel 8 ( channel 16) display 8/16 4. -
Page 7: Button Vcr / Enter
● MODE : Press the MODE (**S) to enter the MODE setup mode. By default, the display modes are circulated as the following sequence, Non-realtime 16-Split, realtime 8-split, 2 Picture-in-Picture, 1 Picture-in-Picture and Dual Split for each MODE key . ZOOM ZOOM ZOOM... -
Page 8: Button M4-B
● M4-A: Press the M4-A (**S) button to display master QUAD. ▲: Press the ▲ (**S) to move cursor in menu setup. ● ▼ Button M4-B M4-B: Press the M4-B (**S) button to switch channel for PTZ ● in opening PTZ function. ●... - Page 9 4.11 PTZ Function ⑴ Press the MENU (*L) key to enter the system main menu, choose "system setup" and enter by press the ENTER (**S) key, "ptz setup" must establish for "yes" ,then press the ENTER (**S) key to enter the sub-menu . Then adjust the value to ensure the value match as the channel of PTZ connected.
-
Page 10: Setup Menu Operation
5. Setup Menu Operation The system provides a built-in GUI setup screen. For each menu, the key function is described in the lower region to help operation. The following figure shows the structure of GUI menu. 10 / 22... -
Page 11: Setup Main Menu
5.1 Setup Main menu: Press MENU (*L) key to enter main menu setup. Move cursor to the item of needed setup with . Press ▲ ▼ ◄/► to select the value. Press ENTER key to enter submenu. Press MENU (*L) key to exit last menu. Press MENU (*L) to exit main menu setup. - Page 12 9) RS232: controlled way set, when RS232 set to off, through the rs485 control the machine, otherwise, through the 232 control the machine, default: off 10) FACTORY RESET: comeback to factory setup. Press ◄/► to select YES or NO. If select NO, press ENTER to enter into next dialog box. Press ◄/►...
-
Page 13: Display Setup Menu
5.3 Display Setup Menu ① DISPLAY ON SCREEN ： Select YES or NO to display camera title, data time in the screen. Press ▲ ▼ t o move cursor, press ENTER to change state. Display “√” SCREEN POSITION S elect screen display area. X ②... -
Page 14: Camera Setup Menu
5.4 Camera Setup Menu Setup each camera’s title / brightness /contrast / saturation / hue / sharpness and mirroring independently. ◄/►.Default: ch1. CAMERA S elect the camera with ① ： TITLE: Channel name setup. Press to move cursor to ② ▲... -
Page 15: Motion Setup Menu
5.5 Motion Setup Menu Setup each camera’s detection time/sensitivity/velocity and masking area ◄/►.Default: ch1. CAMERA ： S elect the camera with DETECTION TIME: ALWAY ON/ALWAYS OFF/ON/OFF TIME SENSITIVITY: setup. From –7 to +7 can be selected. VELOCITY: setup. From –7 to +7 can be selected. / ◄/►... -
Page 16: Auto Sequence Setup Menu
5.6 Auto Sequence Setup Menu Setup display times of AUTO sequence to each screen. There are skip/1sec~99sec be selected. Default: 1sec. 16 / 22... -
Page 17: Event Setup Menu
5.7 Event Setup Menu Can be set up independently every event is enabled. Press ▲ ▼ /◄/► to select item o and press ENTER to change state. “√” is ON. ALARM : External alarm input enable switch. Default: all off ①... -
Page 18: Event Report
5.8 Event Report E V E N T R E P O R T E V E N T R E P O R T E V E N T R E P O R T E V E N T R E P O R T 1 O F 6 P A G E 1 O F 6 P A G E 1 O F 6 P A G E... -
Page 19: Rs-232 And Rs485 Interface
6. RS-232C and RS485 Interface 6.1 PTZ control Before you operate the PTZ ， m ake sure 485 is connected correctly, and make sure the PTZ is available. Long press “MENU” e nter the main menu, and select “SYSTEM SETUP” ，... - Page 20 Control Protocol and operating instructions The company the color split system controlled type points two kinds, one kind is common type does not have the keyboard control function, control instructions simple, suitable for user directly in computer RS232 control. Another kind of have the keyboard control function, and can use the keyboard B5003HB HANBANGGAOKE control operation, easy to use.
- Page 21 Receive Protocol of Color 9 Split system (Simple type) Code(Hex) Description Code(Hex) Description 0x81 Channel 1 0xa2 Zoom 0x82 Channel 2 0xa3 Menu 0x83 Channel 3 0xa4 ▲ 0x84 Channel 4 0xa5 ▼ 0x85 Channel 5 0xa6 0x86 Channel 6 0xa7 0x87 Channel 7...
-
Page 22: External Alarm Interface
Receive Protocol of Color 16 Split system (Simple type) Code(Hex) Description Code(Hex) Description 0x80 NULL 0x95 A Page 8 Unite 0x81 Channel 1 0x96 B Page 8 Unite 0x82 Channel 2 0x97 A Page 9 Unite 0x83 Channel 3 0x98 B Page 9 Unite 0x84 Channel 4... - Page 23 Alarm input explains: 1) to make the alarm input effective, needs to set it in the event the corresponding alarm open. 2) 8 road alarm input, input type unlimited, is often can open type or closed type, when using, need to set the alarm polarity corresponding types.
- Page 25 FREEZE 4 FREEZE 3 FREEZE 2 FREEZE 1 ZOOM CAM4/- CAM3/+ CAM2/ CAM1/ AUTO QUAD/ENTER MENU ▼ ▼ ▼ ▼ ▲ ▲ ▲ ▲...
Need help?
Do you have a question about the MPV-16X and is the answer not in the manual?
Questions and answers