LENCO DAC-100 User Manual page 17

How to use:
1. Insert the power supply plug into the car cigarette power port (Input:
DC12V).
2. Short press
3. Connect the AUX wire (included) from the out jack of the DAB-100 with
the AUX input jack of your car or car radio.
4. DAB mode:
---A: Under DAB mode, long press
then rotate the M button to adjust the DAB station.
★
Since 2 times FM frequency is close DAB station frequency, in order to
avoid interfering DAB station scanning, the FM transmitter will stop work
when you scanning DAB station. After scanning the DAB station, the FM
transmitter will automatically change to the frequency that is not
interfering with the DAB signal frequency.
---B: Under your favorite station, long press
station, then rotate the button to choose the location you want to save
(such as p1, p2...), then short press M button to confirm.
PRESET mode:
1. Short press
station which you saved.
2. Turn on your in-car audio system.
Volume control:
turn on, Short press
, and then rotate the M button to listen the favorite
turn off.
enter into "DAB full scan", and
choose favorite
17