LENCO DAC-100 User Manual page 14

(1) Magnet
(2) Conductive band
(3) Active Antenna
(4) Metal contact
(5) Antenna (transparent)
1. Installation Steps (Photos for reference only)
1) Please connect the black conductive band (2) with the white metal
(4) of the antenna.
2) Open the cover board of the ceiling of the window frame and attach
the magnet of the conductive band on the metal part of the car. Pull
a little bit on the conductive band to make sure that the magnet is
making good contact with the metal of the car.
14