Living Spaces Judith Day Bed Assembly Instructions

Judith Day Bed Assembly Instructions
Hardware included in rail's carton to attach storage and support system.
I O
Φ8 MM Center support rail
1PC 1PC
1
Step#1
Align backrest carefully with Arms and push down firmly to assemble.
Step#2
Attach center support rails (O1) to Arm using Wrench(I), Bolt (B) and Washer (E)(factory
installed).
Attach side support rails (O) to Arm using Wrench(I), Bolt (B) and Washer (E)(factory
installed).
Attach bracket (U) to connect Arm and Back using Wrench(I), Bolt (B) and Washer (E).
CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
O1 P
Side support rail Slats Storage
support rails
1PC 13PCS
P1 Q S
End clip
4PCS 26PCS 3PCS
2
*Bolt B and Washer E
are factory installed*
S1 U
Bracket
2PCS 2PCS
*Bolt B and Washer E
are factory installed*