1. Manuals
  2. Brands
  3. Arbor Technology Manuals
  4. Controller
  5. ELIT-1270
  6. User manual

Arbor Technology ELIT-1270 User Manual

4k multiple display controller with amd ryzen embedded v series apu
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ELIT-1270
4K Multiple Display Controller with AMD
Ryzen™ Embedded V series APU
User's Manual
Version 1.0
P/N: 4016127000100P
2020.05
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELIT-1270 and is the answer not in the manual?

Questions and answers

Related Manuals for Arbor Technology ELIT-1270

Summary of Contents for Arbor Technology ELIT-1270

  • Page 1 ELIT-1270 4K Multiple Display Controller with AMD Ryzen™ Embedded V series APU User’s Manual Version 1.0 P/N: 4016127000100P 2020.05...
  • Page 2 Revision History Version Date Description 2020.05 Initial release - II -...

  • Page 3: Table Of Contents

    Contents Contents Revision History ................II Contents ....................i Preface....................iii Copyright Notice ..................iii Declaration of Conformity ...............iii CE ....................iii FCC Class A ..................iii RoHS ....................iv SVHC / REACH ................iv Important Safety Instructions ..............v Warning ....................vi Lithium Battery Replacement ..............vi Technical Support ..................

  • Page 4: Contents

    Contents Chapter 5 - BIOS ................45 5.1. Main ....................48 5.2. Advanced ..................49 5.2.1. AMD CBS ................50 5.2.2. CPU Configuration ............... 51 5.2.3. ACPI Settings ............... 52 5.2.4. Trusted Computing ............. 53 5.2.5. USB Configuration ............... 54 5.2.6. NVME Configuration ............55 5.2.7 Network Stack Configuration ..........

  • Page 5: Preface

    Preface Copyright Notice All Rights Reserved. The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer. Under no circumstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequential damages arising from the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 6: Rohs

    (PBDE) in electrical and electronic products. Member states of the EU are to enforce by 7/1/2006. ARBOR Technology Corp. hereby states that the listed products do not contain unintentional additions of lead, mercury, hex chrome, PBB or PBDB that exceed a maximum concentration value of 0.1% by weight or for cadmium exceed...

  • Page 7: Important Safety Instructions

    Preface Important Safety Instructions Read these safety instructions carefully 1. Read all cautions and warnings on the equipment. 2. Place this equipment on a reliable surface when installing. Dropping it or letting it fall may cause damage 3. Make sure the correct voltage is connected to the equipment. 4.

  • Page 8: Warning

    Preface Warning The Box PC and its components contain very delicately Integrated Circuits (IC). To protect the Box PC and its components against damage caused by static electricity, you should always follow the precautions below when handling it: 1. Disconnect your Box PC from the power source when you want to work on the inside.

  • Page 9: Warranty

    Preface Warranty This product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.
  • Page 10 This page is intentionally left blank. - viii -...

  • Page 11: Chapter 1 - Introduction

    Chapter 1 Introduction Chapter 1 - Introduction - 1 -...

  • Page 12: Features

    Introduction 1.1. Features • AMD Ryzen™ Embedded V1000 series APU • 2 x DDR4 SO-DIMM socket, dual channel, ELIT-1270-1605 (fan-less) up to 2666 MHz • Support 4 x DisplayPort 1.2, up to 4K (UHD) resolution • Support 2 x USB 3.1 Gen1 and 2 x USB 2.0 • 1 x M.2 2242/ 2280 M-Key for storage ELIT-1270-1807F • 1 x mPCIe slot for connectivity expansion 1.2. About this Manual This manual is meant for the experienced users and integrators with hardware knowledge of personal computers. If you are not sure about the description in this manual, consult your vendor before further handling.

  • Page 13: Specifications

    Introduction 1.3. Specifications System AMD Ryzen™ Embedded V1000 series (SOC FP5) APU up to 54W TDP 2 x 260-pin DDR4 SO-DIMM socket. Memory - Support 2400MHz SDRAM up to 32GB (V1605B) - Support 2666MHz SDRAM up to 32GB (V1807B) Chipset AMD integrated SOC Graphics AMD Radeon™...

  • Page 14: Inside The Package

    Mounting VESA-mount and Wall-mount 2.98 kg (ELIT-1270-1605) Weight (approx.) 2.00 kg (ELIT-1270-1807F) Dimensions 240 x 204 x 50 mm (ELIT-1270-1605) (W x H x D) 240 x 204 x 41 mm (ELIT-1270-1807F) OS Support ® Windows 10 IoT 64-bit / Linux: Ubuntu (Kernel: 3.1X) 1.4.

  • Page 15: Ordering Information

    Introduction 1.5. Ordering Information ELIT-1270 w/ AMD Ryzen V1605B, 4 x DP, 2 x GbE LAN, ELIT-1270-1605 4 x USB, 2 x COM w/o Fan ELIT-1270 w/ AMD Ryzen V1807B, 4 x DP, 2 x GbE LAN, ELIT-1270-1807F 4 x USB, 2 x COM w/ Fan...
  • Page 16 This page is intentionally left blank. - 6 -...

  • Page 17: Chapter 2 - Getting Started

    Chapter 2 Getting Started Chapter 2 - Getting Started - 7 -...

  • Page 18: Dimensions

    Getting Started 2.1. Dimensions 244.00 240.00 ELIT-1270-1605 (fan-less) 244.00 240.00 Unit: mm ELIT-1270-1807F - 8 -...

  • Page 19: Tour The Computer

    Getting Started 2.2. Tour the Computer The front and rear panels of the ELIT-1270-1807F and ELIT-1270-1605 are similar. The following will use ELIT-1270-1807F as the example. ② ⑧ ⑦ ⑥ ⑤ ④ ③ ① Front View ⑨ ⑩ Rear View ⑪...

  • Page 20: Driver Installation Note

    Getting Started ⑨ 2 x RS-232/422/485 serial ports ⑩ DC 9~36V Input (4-PIN Terminal Block) ⑪ Antenna holes ⑫ Ground screw 2.3. Driver Installation Note For operating system of Windows 10, please go to our website at www.arbor-technology.com and download the driver pack from the product page.

  • Page 21: Chapter 3 - Engine Of The Computer

    Chapter 3 Engine of the Computer Chapter 3 - Engine of the Computer - 11 -...

  • Page 22: Board Layout

    Engine of the Computer 3.1. Board Layout (8) CN2 (12) LSENSOR1 (4) SCPOUT1 (2) PWRIN1 (13) MMC1 (9) CN1 (11) SMB1 (7) MEMB1 (15) SIM1 (3) SCPIN1 (5) SYSFAN1 (10) DGP1 (6) TPC1 (16) USB3 (14) INV1 (1) POEOUT1 JPWM1 ...
  • Page 23 Engine of the Computer ➐ JDIO1 (Reserved) Digital I/O VCC Output Voltage ➑ JSW1 (Reserved) DisplayPort 4 or LVDS Sigital Output Selection ➒ JSW2 (Reserved) Reset Button ➓ JSW3 (Reserved) Power Button JACCON2 (Reserved) ACC ON Mode selection (for debug) Connectors Label Description...
  • Page 24 Engine of the Computer JLOUT1 Line-out Port 28~31 DP1~4 DisplayPort 1.2 Connector 32, 33 USB1, 2 USB 3.0/2.0 Connector 34, 35 USB31_2, USB32_1 USB 3.1 Gen1 Connector 36, 37 LAN1, 2 RJ-45 GbE Connector LED2 HDD LED Output Power Button CPUFAN1 CPU Fan Power Connector 41, 42...

  • Page 25: Jumpers And Connectors

    Engine of the Computer 3.2. Jumpers and Connectors 3.2.1. Jumpers ➊ JPWM1 (Reserved) Function: LVDS Brightness Control Jumper Type: 2.00mm pitch, 1x3-pin header Setting: Description Control by SOC (default) Control by PIC ➋ JVLCD2 (Reserved) Function: LVDS Backlight Output Voltage Jumper Type: 2.00mm pitch, 1x3-pin header Setting:...
  • Page 26 Engine of the Computer ➍ JATX1 (Reserved) Function: AT Mode selection Jumper Type: 2.00mm pitch, 1x3-pin header Setting: Description AT Mode (default) ATX Mode ➎ JUSB1 Function: MCU USB Mode Selection Jumper Type: 2.00mm pitch, 1x3-pin header Setting: Description MCU USB to SOC (default) MCU USB to debug USB port ➏...
  • Page 27 Engine of the Computer ➑ JSW1 (Reserved) Function: DisplayPort 4 or LVDS Sigital Output Selection Jumper Type: 2.00mm pitch, 1x3-pin header Setting: Description DP Mode (default) LVDS Mode ➒ JSW2 (Reserved) Function: Reset Button Jumper Type: 2.00mm pitch, 1x3-pin header ➓...

  • Page 28: Connectors

    Engine of the Computer 3.2.2. Connectors (1) POEOUT1 (Reserved) Function: PoE Power Connector Connector Type: 2.54mm-pitch 4-pin header Pin Assignment: Desc. DCIN DCIN (2) PWRIN1 Function: Power Input Connector Connector Type: 3.96 mm pitch 1x4-pin one-wall wafer connector Pin Assignment: Desc.
  • Page 29 CAP Input Connector Connector Type: 3.96mm-pitch 1x2-pin one-wall wafer connector Pin Assignment: Desc. +V12VA_S (5) SYSFAN1 Function: System Fan Power Connector (for ELIT-1270-1807F) Connector Type: 2.54mm pitch 1x4 one-wall wafer connector Pin Assignment: Pin Desc. +12V CTRL (6) TPC1 (Reserved) Function: Resistive Touch Connector Connector Type: 1.25mm pitch 1x5-pin wafer connector...
  • Page 30 Engine of the Computer (7) MEMB1 (Reserved) Function: Membrane Connector Connector Type: 1.25mm pitch 1x10-pin wafer connector Pin Assignment: Pin Description. PWR_IN_SW# EN_PANEL# PANEL_PWM+ PANEL_PWM- GPIO_FTN MEMB1_LED_ON# MEMB1_LED_OFF# (8)(9) CN2, 1 (Reserved) Function: USB Connector Connector Type: 1.25mm pitch 1x4-pin wafer connector Pin Assignment: Pin Description.
  • Page 31 Engine of the Computer (11) SMB1 (Reserved) Function: SMbus Connector Connector Type: 1.25mm pitch 1x6-pin wafer connector Pin Assignment: Pin Description. +V3.3 SCLK0 SDATA0 +V12 (12) LSENSOR1 (Reserved) Function: Light Sensor Connector Connector Type: 1.25mm pitch 1x6-pin wafer connector Pin Assignment: Pin Description.
  • Page 32 Engine of the Computer (14) INV1 (Reserved) Function: Blacklight Connector Connector Type: 2.00mm pitch 1x5-pin wafer connector Pin Assignment: Pin Desc. VDD(5V/12V) Backlight_EN Brightness(PWM) (15) SIM1 Function: SIM Card Socket Connector Type: SIM card socket with a hinged cover Pin Assignment: Description Description Power Voltage...
  • Page 33 Engine of the Computer (17) LVDS1 (Reserved) Function: LVDS Connector Connector Type: 1.25mm pitch 2x15-pin BTB connector Pin Assignment: Description Description VCC(5V/3V) VCC(5V/3V) LVDS_A_CLK+ LVDS_B_CLK+ LVDS_A_CLK- LVDS_B_CLK- LVDS_A0+ LVDS_B0+ LVDS_A0- LVDS_B0- LVDS_A1+ LVDS_B1+ LVDS_A1- LVDS_B1- LVDS_A2+ LVDS_B2+ LVDS_A2- LVDS_B2- LVDS_A3+ LVDS_B3+ LVDS_A3- LVDS_B3-...
  • Page 34 Engine of the Computer (19) MC1 Function: PCI Express Mini-card Full Size socket Connector Type: Onboard 0.8mm pitch 52-pin edge card connector Pin Assignment: The pin assignments conform to the industry standard. 51 52 (20) BAT1 Function: RTC Battery Connector Connector Type: 2.00mm pitch 1x2-pin box connector Setting:...
  • Page 35 Engine of the Computer (23) SATA1 (Reserved) Function: SATA Connector Connector Type: On-board Serial ATA Connector Pin Assignment: Desc. (24) BH1 Function: SWD debug connector Connector Type: 1.27mm pitch 10-pin connector Pin Assignment: Pin Description Description MCU_3V3 SWD_DIO SWD_CLK SWD_SWO IF_RST (25) AUDIO1 (Reserved) Function:...
  • Page 36 Engine of the Computer (26) JMIC1 Destription: Mic-in Port Connector Type: Pink 3.5mm audio jack with shield Line Out (27) JLOUT1 Destription: Line-out Port Connector Type: Lime green 3.5mm audio jack with shield MIC In (28)~(31) DP1~4 Function: DisplayPort 1.2 Connector Connector Type: Connect the display device to the DisplayPort 1.2 Connector Pin Assignment: The pin assignments conform to the industry standard.
  • Page 37 Engine of the Computer (34)(35) USB31_2, 1 Function: USB 3.1 Gen 1 Connector Connector Type: USB 3.1 Gen 1 Type-A USB connector Pin Assignment: The pin assignments conform to the industry standard. 1 2 3 4 USB31_2 USB31_1 (36)(37) LAN1, 2 Function: RJ-45 GbE Connector Connector Type: RJ-45 connector that supports 10/100/1000Mbps fast Ethernet...
  • Page 38 LED tact switch with green and red colors Pin Assignment: Pin Description Description SW1_LED_N SW1_LED_P (40) CPUFAN1 Function: CPU Fan Power Connector (for ELIT-1270-1807F) Connector Type: 2.54 mm pitch 1x4 one-wall wafer connector Pin Assignment: Pin Description. +12V FAN Speed FAN CTRL (41)(42) COM1, 2...
  • Page 39 Engine of the Computer COM1 COM2 (45) PCIE1 (Reserved) Function: PCIe x1 Golden Finger Connector Type: The pin assignments conform to the industry standard. (46) PCIE2 (Reserved) Function: PCIe x4 Golden Finger Connector Type: The pin assignments conform to the industry standard. - 29 -...
  • Page 40 This page is intentionally left blank. - 30 -...

  • Page 41: Chapter 4 - Installation And Maintenance

    Chapter 4 Installation & Maintenance Chapter 4 - Installation and Maintenance - 31 -...

  • Page 42: Access The Inside Of The Computer

    Follow through the guide below to access the inside of the computer. 4.1.1. Disassemble the Computer ELIT-1270-1605 (Fanless Model) 1. Remove the 2 screws on the top case as shown below and remove the top case from the computer.
  • Page 43 Installation & Maintenance 3. Remove the 3 screws on the bottom case that securing the rear panel. 4. Remove the screws as shown below on both sides and remove the rear panel. 5. Then you can access the components of the main board. M.2 socket Memory socket SIM card...

  • Page 44: Reassemble The Computer

    Installation & Maintenance ELIT-1270-1807F (Model with Fan) 1. Remove the screws on both sides as shown below. Then remove the top case and the rear panel from the computer. Front Rear Panel Side Panel Side Rear Front Panel Side Panel Side 2.

  • Page 45: Install Hardware

    Installation & Maintenance 4.2. Install Hardware 4.2.1. Install SIM Module 1. Locate the SIM card socket. SIM card socket 2. Follow the direction of the arrow to open the lid of the SIM card slot. To open the lid 3. Insert the SIM card into the slot. Close the lid and follow the arrow direction to lock it.

  • Page 46: Install Wi-Fi Module

    Installation & Maintenance 4.2.2. Install Wi-Fi Module The computer comes with one Mini-card socket to load the computer with a wireless module of PCI Express Mini-card form factor. This section will guide you to install the Wi-Fi module. 1. Locate the PCI Express Mini-card socket for wireless module. Wi-Fi module socket 2.
  • Page 47 Installation & Maintenance SMA connector MHF connector 4. Connect the RF antenna’s MHF connector to the Wi-Fi module’s main connector marked 0. If you are going to connect a secondary antenna, connect it to the connector marked 1. Connect the RF antenna’s MHF connector to the Wi-Fi module’s main connector (marked 0)
  • Page 48 Installation & Maintenance plug the module, and note the notch on the wireless module should meet the break of the connector. Connector break 7. Press the module down and fix the module in place using one screw. 8. Remove the plastic plug(s) from the computer's side panel to make antenna hole(s).
  • Page 49 Installation & Maintenance 9. From the other end of the RF antenna, which is an SMA connector, remove the washer and the nut. Save the washer and nut for later use. Note the SMA connector has the form of a threaded bolt, with one flat side. Among the screw Remove thread, there is a...

  • Page 50: Install Memory Module

    Installation & Maintenance 12. Have the external antenna(s). Screw and tightly fasten the antenna(s) to the SMA connector(s). 4.2.3. Install Memory Module The main board has one dual inline memory module (DIMM) socket. Load the computer with a memory module to make the computer run programs. The memory module for the computer’s SO-DIMM socket should be a 260-pin DDR4 with a “key notch”...
  • Page 51 Installation & Maintenance To install a memory module: 1. Locate the memory socket of the computer. Memory socket Confront the memory module’s edge connector with the SO-DIMM slot connector. Align the memory module’s key notch at the break on the SO- DIMM slot connector.

  • Page 52: Install M.2 Ssd

    4.2.4. Install M.2 SSD This page is intentionally left blank. The computer comes with a M.2 socket for M.2 SSD installation. It supports form factors of 22x42 and 22x80. 1. Locate the memory socket of the computer. M.2 socket 2. Align the M.2 SSD's key notch with the socket's notch. By a slanted angle, fully plug the SSD into the socket.

  • Page 53: Wall Mounting (Optional)

    Installation & Maintenance 4.3. Wall Mounting (optional) The computer comes with wall mount kit as standard accessory. If you need to attach the wall mount brackets to the computer, follow the instructions below: 1. Position the computer with the bottom side facing up. 2.
  • Page 54 This page is intentionally left blank. - 44 -...

  • Page 55: Chapter 5 - Bios

    Chapter 5 BIOS Chapter 5 - BIOS - 45 -...
  • Page 56 BIOS The BIOS Setup utility is featured by American Megatrends Inc to configure the system settings stored in the system’s BIOS ROM. The BIOS is activated once the computer powers on. When the computer is off, the battery on the main board supplies power to BIOS RAM.
  • Page 57 BIOS Key Commands The BIOS Setup utility relies on a keyboard to receive user’s instructions. Hit the following keys to navigate within the utility and use the utility. Keystroke Function ← → Moves left/right between the top menus. ↓ ↑ Moves up/down between highlight items.

  • Page 58: Main

    BIOS 5.1. Main The Main menu features the settings of System Date and System Time and displays some BIOS info. Setting Description BIOS Name Delivers the model name of the computer. BIOS Version Delivers the computer’s BIOS version. Build Date and Time Delivers the date and time when the BIOS Setup utility was made/ updated.

  • Page 59: Advanced

    BIOS 5.2. Advanced Setting Description AMD CBS 5.2.1. AMD CBS on page CPU Configuration 5.2.1. CPU Configuration on page ACPI Configuration 5.2.4. ACPI Settings on page Trusted Computing 5.2.4. Trusted Computing on page USB Configuration 5.2.5. USB Configuration on page NVMe Configuration 5.2.6.

  • Page 60: Amd Cbs

    BIOS 5.2.1. AMD CBS Setting Description Zen Common Options Core Performance Enabled / Disable (default) CPB. Boost Controls IO based C-state generation and DF C-states. Global C-State Control ► Options: Enabled / Disabled (default) NBIO Common Options >GFX Configuration Enables integrated graphics controller. Integrated Graphics Controller ►...

  • Page 61: Cpu Configuration

    BIOS 5.2.2. CPU Configuration Setting Description NX Mode Enable (default) / Disable No-execute page protection function. SVM Mode Enable (default) / Disable CPU virtualization. - 51 -...

  • Page 62: Acpi Settings

    BIOS 5.2.3. ACPI Settings Setting Description Enables (default) or Disables System ability to Hibernate (OS/ Enable Hibernation S4 Sleep State). This option may be not effective with some OS. Select ACPI sleep state the system will enter when the SUSPEND button is pressed. ACPI Sleep State ►...

  • Page 63: Trusted Computing

    BIOS 5.2.4. Trusted Computing Setting Description Security Device Support Enable (default) or Disable BIOS support for security device. Sets the security device. Options: TPM 1.2, TPM 2.0 and Auto (default). ► TP 1.2 will restrict support to TPM 1.2 devices. Device Select TPM 2.0 will restrict support to TPM 2.0 devices.

  • Page 64: Usb Configuration

    BIOS 5.2.5. USB Configuration Setting Description Enables/disables legacy USB support. Options available are Enabled (default), Disabled and Auto. ► Select Auto to disable legacy support if no USB device are ► Legacy USB Support connected. ► Select Disabled to keep USB devices available only for EFI applications.

  • Page 65: Nvme Configuration

    BIOS Use this item to set maximum time the device will take before it properly reports itself to the host controller. ‘Auto’ uses default value: for a root port it is 100 ms, for a hub port the delay is taken from hub descriptor.

  • Page 66: Network Stack Configuration

    BIOS 5.2.7 Network Stack Configuration Setting Description Network Stack Enable (default)or Disable UEFI network stack. IPv4 PXE Support Enable (default) or Disable IPv4 PXE boot Support. Enable or Disable (default) IPv4 HTTP boot support. If disabled, IPv4 HTTP Support IPv4 HTTP boot support will not be available. Enables/disables IPv6 PXE boot Support.

  • Page 67: Ide Configuration

    BIOS 5.2.8 IDE Configuration Access this submenu to view the SATA device information - 57 -...

  • Page 68: Super Io Configuration

    BIOS 5.2.9. Super IO Configuration Setting Description Serial Port 1~4 Configuration Serial Port Enable (default) or Disable Serial Port (COM). Select an optimal setting for Super IO device. ► Port 1 default; IO=3F8h; IRQ=4 ► Port 2 default: Change Settings IO=2F8h;...

  • Page 69: Hardware Monitor

    BIOS 5.2.10. Hardware Monitor Select this submenu to view the main board’s hardware status. Select it to run a report of various info as depicted below: Setting Description CPUFAN SmartFan Function Enables (default) or Disables Smart Fan Temperature 1~4 & RPM Percentage 1~4 CPUFAN SmartFan Auto fan speed control.

  • Page 70: S5 Rtc Wake Settings

    BIOS 5.2.11. S5 RTC Wake Settings Setting Description Enable or Disable (default) system wake on alarm event. ► Options available are: Wake System Disabled (default): from S5 Fixed Time: System will wake on the hr::min::sec specifiedc. DynamicTime: If selected, you need to set Wake up minute increase from 1 - 5.

  • Page 71: Csm Configuration

    BIOS 5.2.12. CSM Configuration Setting Description CSM Support Enable (default) or Disable CSM Support. Control the Legacy/UEFI ROMs priority. Boot option filter ► Options: UEFI and Legacy (default), Legacy only, UEFI only Control the execution of UEFI and Legacy PXE OpROM Network ►...

  • Page 72: Chipset

    BIOS 5.3. Chipset Setting Description SB USB Configuration 5.3.1. Graphics Configuration on page - 62 -...

  • Page 73: Sb Usb Configuration

    BIOS 5.3.1. SB USB Configuration Setting Description XHCI0 Port 0~3 Enable (default) or Disable XHCI0 Port 0~3(XHCI/EHCI) XHCI1 Port 0/1 Enable (default) or Disable XHCI1 Port 0~1(XHCI/EHCI) - 63 -...

  • Page 74: Security

    BIOS 5.4. Security Setting Description To set up an administrator password: Select Administrator Password. Administrator An Create New Password dialog then pops up onscreen. Password Enter your desired password that is no less than 3 characters and no more than 20 characters. Hit [Enter] key to submit.

  • Page 75: Secure Boot

    BIOS 5.4.1. Secure Boot Setting Description Enable or Disable (default) Secure Boot. Secure Boot activated when Secure Boot - Secure Boot is enabled - Platform Key (PK) is enrolled. - System mode is user/deployed, and CSM is disabled. Customization Secure Boot mode: Secure In custom mode Secure Boot Policy variables can be configured by a Customization...

  • Page 76: Facatory Key Provision

    BIOS 5.4.2. Factory Key Provision Setting Description Provision factory default keys on next re-boot only when System in setup mode. Factory Key Provision Options: Enabled, Disable (default) ► Allows to force system to user mode. Configure NVRAM to contain Restore Factory Keys OEM-defined factory default Secure Boot Keys.

  • Page 77: Boot

    BIOS 5.5. Boot Setting Description Set how long to wait for the prompt to show for entering BIOS Setup. Setup Prompt Timeout The default setting is 2 (sec). ► Set it to 65535 to wait indefinitely. ► Sets whether to enable or disable the keyboard’s NumLock state when the system starts up.
  • Page 78 BIOS Power Delay Function Power Delay Function Set the system support power delay function. ► Options: Enable (default): Support power delay function. Disable: Power on/off manually operated. Power on delay Select the time which the system will power on. ► Options: Manually Operator (default), 04 Seconds, 08 Seconds and 16 Seconds.

  • Page 79: Save & Exit

    BIOS 5.6. Save & Exit Setting Description Save Changes Saves the changes and quits the BIOS Setup utility. and Reset Discard Changes Quits the BIOS Setup utility without saving the change(s). and Exit Restores all settings to defaults. Restore Defaults ►...

Table of Contents