Remote Control For Powercinema Instanton / Powercinema For Windows Xp Home (Device-Dependent); Removing Remote Control; Using Remote Control - Fujitsu Siemens Computers AMILO Xi Series Getting Started

Remote control for PowerCinema InstantON / PowerCinema
for Windows XP Home (device-dependent)
Your notebook is equipped with a CIR interface for a remote control. You can operate PowerCinema
InstantON or PowerCinema with the remote control.
Additional information is contained in the online manual for PowerCinema InstantON or
i
PowerCinema . This online manual can be found on the "Drivers & Utilities" CD/DVD.

Removing remote control

Using remote control

1
10600690744, edition 1
►
►
1
2
The remote control (2) must be in the effective
range (horizontally approx. 30°) of the notebook's
CIR interface (1). You may not be more than 5 to
7 m from the notebook.
2
Preparation for use and operation
Press the remote control (1). It will project
further out of the notebook's case.
Pull the remote control (2) out of the slot.
English - 13