MODEL
• On the base, press
• Scroll down to SYSTEM SETUP and press the
key.
CLX465
• Select REGISTER HANDSET and press the
CLX485
ELBT585
key.
ELBT595
• On the handset, press and hold
reads HANDSET REGISTERING and you hear a
beep.
• Remove the battery compartment cover from the
bottom of the main base.
• Press and hold the
battery compartment until the base LEDs start
ELT560
blinking.
• On the handset, press and hold
reads HANDSET REGISTERING and you hear a
beep.
2. When REGISTRATION COMPLETE. is displayed; the handset
has been registered to the base. If REGISTRATION FAILED.
appears, please try these steps again.
DIRECTIONS:
[menu/select]
[#]
button located in the
Registration
[#]
6
.
OK
soft
OK
until the display
until the display
soft