Subscribe to Our Youtube Channel
Related Manuals for Ingersol Rand 500PS3
Summary of Contents for Ingersol Rand 500PS3
- Page 1 47109533 Edition 1 September 2010 Air Impulse Wrench (Twin Blade) Model 500PS3, 700PS3 and 900PS4 Maintenance Information Save These Instructions...
- Page 2 No. EQ106S–K400), fi ll the mechanism with the fl uid furnished torque settings. If the tool does not perform satisfactorily, repeat in the Kit until the fl uid overfl ows the fi ll hole. Model 500PS3 will the refi ll procedure and pay particular attention to removing require 9 cc of fl uid;...
- Page 3 Disassembly General Instructions NOTICE 1. Do not disassemble the tool any further than necessary to replace or repair damaged parts. In the following step, do not remove or turn the Shut–off 2. When grasping a tool or part in a vise, always use leather–covered Adjustment Screw (73) located in the Front Liner Cover (72).
- Page 4 13. Using a pin punch, tap the Throttle Retaining Pin (13) out of the CAUTION Handle. 14. Grasp the Trigger (11) and pull the assembled throttle out of the In the following step, take all precautions necessary to prevent Motor Housing. being burned by handling warm or hot parts.
- Page 5 1. Insert the long shaft of the Piston Stop (58) into the central the Cap. Tighten the Cap on models 500PS3 and 700PS3 between opening of the O–ring Installer furnished with the Tool Kit (Part 9.4 and 10.7 ft–lb (12.7 and 14.5 Nm) torque and on model...
- Page 6 Related Documentation For additional information refer to: Product Safety Information Manual 04584983. Product Information Manual 47133053. Parts Information Manual 47135686. Manuals can be downloaded from www.ingersollrandproducts.com 47109533_ed1...
- Page 7 Notes:...
- Page 8 www.ingersollrandproducts.com © 2010 Ingersoll Rand...
Need help?
Do you have a question about the 500PS3 and is the answer not in the manual?
Questions and answers