Connecting Video / Audio Cable; Connecting The Ac Adaptor - LG FiRST MEDIA SH960C-LN Owner's Manual

8 Connecting
Additional Information for HDMI
y When you connect an HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
unit. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on
this unit.
- The connected device' s video input is set
2
correctly for this unit.
- The connected device is compatible with
1280x720p, 1920x1080i,1920x1080p or
3840x2160p video input.
y Not all HDCP-compatible HDMI or DVI devices will
work with this unit.
- The picture will not be displayed properly with
non-HDCP device.
- TV screen is changed to black screen.

Connecting Video / Audio cable

Connect the VIDEO/AUDIO OUT on the unit to
VIDEO/AUDIO IN on TV with video/audio cable, such
as VIDEO with yellow, AUDIO Left/Right with
white/red.
Rear of this unit
Video/Audio Cable
,
Note
y Do not connect the unit through a VCR.
The image could be distorted by the copy
protection system.
y For high definition video, it is recommended
to use the HDMI connection.
SH960C-LN_BIDNLLK_OM_Eng_MFL67370778.indd 8
Connecting the AC
Adaptor
Connect the unit to the power supply with the
supplied AC adaptor.
y Contact an electrical parts distributor for
VIDEO IN L - AUDIO IN - R
Rear of this unit
AC Adaptor
assistance in selecting a suitable AC plug adaptor
or AC cord set.
>
Caution
Only use the AC adaptor supplied with this
device. Do not use a power supply from another
device or manufacturer. Using any other power
cable or power supply may cause damage to the
device and void your warranty.
Plug into a
power source.
2016-07-05 4:50:49