Advertisement
PROBLEM
Fan will not turn on
Green "PROCESSOR ON"
LED will not light up
Optic(s) not functioning
POSSIBLE CAUSE
Boss™ unit is not plugged
into an energized electrical
receptacle.
Internal component failure.
"FAN SPEED" switch is in
the "OFF" position.
Green LED has failed.
Internal component failure.
Rated life of optic has
been met.
Optics have been
damaged.
Internal component failure.
TROUBLESHOOTING
SOLUTION
Ensure circuit breaker is
'ON' and the electrical
receptacle has proper
power available.
Contact local distributor for
service.
Turn on "FAN SPEED"
switch to desired air flow
setting.
Contact local distributor for
service.
Contact local distributor for
service.
Contact local distributor for
replacement optics/service.
Contact local distributor for
replacement optics/service.
Contact local distributor for
service.
Advertisement
