Philips Salon Rollers Pro Manual page 9

Usually the small rollers are used on the sides of the head and the large
rollers on top of the head.
8 Wind the roller towards the scalp, maintaining an even tension. Fix
the roller with a clip or pin.
Use the metal pins to fix the small and medium rollers and use the
butterfly clips to fix the large rollers.
9 Continue with the rest of the hair, always taking locks of the
appropriate width for the rollers.
10 Leave the rollers in the hair until the hair has completely cooled
down.
You can use a hairdryer for additional heat to speed up the curling
process.
11 Remove rollers from the hair by first removing the clip or pin and
then carefully removing the roller by unwinding the lock of hair.
1 Don't comb or brush the hair after styling, as this would destroy
the curls. Just run your fingers through the curls to divide them
into smaller strings and to get the most natural effect.
cleaning
1 Always switch the appliance off and unplug it before cleaning it.
 Make sure the rollers and the appliance have cooled down before
cleaning them.
 Clean the rollers with a moist cloth and remove any residues of e.g.
hairspray.
 Clean the appliance with a moist cloth.
Never immerse the appliance in water nor pour water into it.
5 Let the rollers dry completely before placing them back into the
appliance.
EngliSH
9