Philips Salon Rollers Pro Manual page 8

EngliSH
8
 Dry your hair by making brushing movements with the dryer at a
small distance from your hair.
Use a comb to disentangle hair gently from the roots to the tips.
 When you have finished drying, set the hairdryer to the cold setting
for a final cold shot.This closes the cuticles and leaves your hair
glossier.
using the appliance
Do not leave the appliance unattended when it is switched on.
1 Make sure all rollers are in the appliance, the clips and pins are
outside the appliance and the lid is closed.
 Put the plug in the wall socket.
 Switch the appliance on by setting the red rocker switch on the
right side of the appliance to '1'. The switch will light up when the
appliance is switched on.
 Let the appliance heat up for about 10-15 minutes. When the red
dots on top of the rollers have turned white, the appliance is ready
for use.
You can leave the appliance switched on while you are putting the
,
rollers in your hair.
5 Make sure the hair is clean, dry and tangle-free. Divide the hair into
sections.
6 Take a lock of hair and comb it through. You can use a little bit of
hairspray for better fixation.
Take locks with a width of approx. 4cm for the big rollers, approx. 3cm for
the medium rollers and approx. 2cm for the small rollers.
7 Take the end of the lock and start winding the lock round the
roller. Make sure the end of the lock is wound in the required
direction.
Always hold the rollers by the plastic rim, because the other parts of the
rollers are hot.