Components Used - TASKA Prosthetics Low Profile Wrist Maintenance And Care Manual

3 Low Profile maintenance and care guide

Components used

The following components are supplied with each Low Profile TASKA Hand.
Replacement parts can be purchased from your local TASKA agent.
TASKA-LPLC-01 152-09-012
Low Profile Wrist Lamination Ring Low Profile Wrist Masking Plug
• Knurled lamination area Protects delicate components on
• 6x notches for rotational the Low Profile Lamination Ring
lamination support during the laminating process.
• Grooved features for maximised
bonding area to lamination.
do more
152-08-021
Low Profile Wrist O-Ring
This will come pre-assembled on
the Low Profile Lamination Ring.
Replace if worn, damaged
or missing to maintain a
waterproof seal.
152-20-014 152-08-070
Switch Block Low Profile Wrist Lubricant
This connects the Power Switch Apply after laminating as per the
and up to 2 sensor inputs (EMG or following instructions to ensure
otherwise) to the hand. the best possible performance of
the product.
See figure 3 for the correct
wiring detail.
Low Profile maintenance and care guide 4
152-08-061
Low Profile Wrist Set Screw
Used to secure the hand to
the Lamination Ring. 1 extra is
provided per hand.