Table of Contents
Advertisement
3.4.4 Netw ork Setup / 802.1x
Network/802.1x
①
802.1x
②
Authentication
③
Username
④
Password
Network/QoS
⑤
QoS
⑥
Real-time monitor
⑦
Command
Network/Certification
⑧
Certificate
Description
802.1X is a port-based network access control protocol for preventing unauthorized devices
from accessing the LAN. You can set up user name and password credentials for the camera so
that it is not blocked by the network switch.
Not configurable. PEAP (Protected Extensible Authentication Protocol) is selected by default.
Enter the user name that will be used to authenticate the camera.
Enter the password that will be used to authenticate the camera.
Description
The QoS (Quality of Service) settings control bandwidth use by prioritizing certain data packets
over others.
The DSCP (Differentiated Services Codepoint) value indicates the priority level for live video
data packets. Select a value between 0 (lowest priority) and 63 (highest priority).
The DSCP (Differentiated Services Codepoint) value indicates the priority level for non-video
data packets such as configurations and search operations. Select a value between 0 (lowest
priority) and 63 (highest priority).
Description
You can import or export a digital certificate and private key for the camera.
Click Browse, browse to the certificate/key location, click Open, and then click Import to import
a third-party CA.
Click Delete to remove the current CA.
Click Export to export the self-signed CA by Honeywell.
24
Advertisement
Table of Contents
