Page 1
RETURN VIDEO SELECTOR CAC-6 OPERATION AND MAINTENANCE MANUAL 1st Edition (Revised 2)
Page 2
Sony Corporation. Le matériel contenu dans ce manuel consiste en informations qui sont la propriété de Sony Corporation et sont destinées exclusivement à l’usage des acquéreurs de l’équipement décrit dans ce manuel.
You can control the return video signal and headset microphone while operating the video camera. The buttons on the CAC-6 are operated with a light touch of a fi nger so that unwanted movement of the camera can be avoided.
5 Mounting part With your fi nger on this button, the return video 1 Used to mount the CAC-6 to the panning rod of a signal appears on the viewfi nder screen. When the tripod. The diameter of the mounting part is 25 mm.
1-3. Installation The CAC-6 can be mounted to the desired position of the panning rod of a tripod at any angle the camera operator desires. Installation examples Camera CAC-6 CAC-6 Installation examples Installing the CAC-6 1. Loosen the screw on the mounting part, and open it.
3. Connect the connector to the RET CONTROL connector on the video camera. Camera RET CONTROL CAC-6 1-4. Specifi cations Mass 300 g (11 oz) Dimensions Unit: mm (inches) Panning rod 155 (6 1/8) Dimensions diagram Design and specifi cations are subject to change without notice.
1-216-659-91 s RES, METAL FILM CHIP 2.2K 1-216-659-91 s RES, METAL FILM CHIP 2.2K SW-542 1-216-659-91 s RES, METAL FILM CHIP 2.2K BOARD NO. 1-646-001-13 1-554-303-41 s SWITCH, KEY BOARD "MIC" 1-554-303-41 s SWITCH, KEY BOARD "RET 1" 1-554-303-41 s SWITCH, KEY BOARD "RET 2" CAC-6...