Page 1
Instructions - Parts ™ Graco InSite 333276A Remote Reporting Installation Kit For remote reporting of actual temperature, temperature setpoint, actual pressure, ® pressure setpoint, cycles, and GPS location from a Reactor 2 E-30 or E-XP2 proportioner. For professional use only.
1. Use two bolts (A) to secure cellular module (1) to NOTICE bracket. See F . 1. To prevent damage to the Graco InSite, do not expose to rain. 2. Connect 4-pin end of cable (2) to cellular module (1) connector.
Operation Registering and Activating the Graco InSite To register and activate the Graco InSite, go to www.GracoInSite.com, click on “InSite Login”, then fol- low the instructions on the screen. Find and record the 15 digit serial number from the cel-...
Activate unit. See Registering and Cannot view data for my unit(s) on Graco InSite unit has not been acti- Activating the Graco InSite on website. vated. page 4. Temperature data not displayed on Reactor temperature measurement See Reactor repair manual.
Parts Parts Part Description 16X118 MODULE, cellular and GPS 16V801 CABLE, M8 4 pin female to M12 8-pin male, 9.8 ft (3 m) 127377 TIE, cable, 6 in. 125871 TIE, cable, 7.5 in. 333276A...
Technical Data Technical Data Graco InSite Remote Reporting Installation Kit Metric Operating Temperature -22 to 167°F -30 to 75°C Storage Temperature -40 to 185°F -40 to 85°C Ambient Temperature during Battery Charging 41 to 104°F 5 to 40°C FCC ID...
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.