Mounting The Ubc-Rh96; Using The Mounting Bracket - Uniden UBC-RH96 Owner's Manual

Mounting the UBC-RH96

The following two mounting methods are suggestions
used by most. Depending upon your individual
situation, you may decide on a different approach.

Using the Mounting Bracket

For most vehicles, the supplied bracket will be the
easiest method of mounting.
With the bracket removed from the Remote Head, use
the holes in the bracket as a template to initially mark
the location you plan to use in your vehicle. Be abso-
lutely certain of what might be behind the mounting
surface before making any holes, be it above, or below,
UBC-RH96 Digital Scanner OM.indd7 7 UBC-RH96 Digital Scanner OM.indd7 7
or in front of your dash, armrest console, or other
location. If you drill carelessly, expensive damage can
result. If in doubt, consult your vehicle dealer's service
department or a qualifi ed professional installer.
Important: AVOID AIRBAG DEPLOYMENT
ZONES. Ignoring this installation concern may result
in bodily harm and the inability of the airbag to per-
form properly.
Be sure to select a mounting location so that when you
route power and remote cables they do not interfere
with any existing cables or other controls.
7
10/9/07 4:15:57 PM 10/9/07 4:15:57 PM