Confi guration — Menu Mode
Once you have the units on, press [MENU] to enter
the Confi guration Settings Options. You can skip the
opening screens by holding [MENU] while turning on
power. You see the Remote
Head Menu screen.
•
To select an item on the
screen, rotate the FUNC
knob to scroll to the item.
•
To make a choice, press [E/
knob.
•
To step back to a previous menu, press [MENU].
UBC-RH96 Digital Scanner OM.indd18 18
UBC-RH96 Digital Scanner OM.indd18 18
Remote Head Menu
Remote Head Menu
Set LCD Contrast
Set LCD Contrast
Mobile Option
Mobile Option
Handy Option
Handy Option
] or the rotary FUNC
Yes
18
•
To exit from the Menu Mode, press [SCAN],
[HOLD], or [L/O].
•
To re-enter the Menu Mode, turn the Remote head
off then on while holding in [MENU].
Setting the UBC-RH96 LCD Contrast
1.
Rotate the rotary control to
then press the knob or [E/Yes].
2.
Rotate the knob from
Contrast 1
Contrast 1
Contrast 1 5. The LCD contrast changes with
Contrast 1 5
each level. The default is level 8.
3.
When you reach the desired level, press the knob or
[E/
] again to make your selection.
Yes
Set LCD Contrast
Set LCD Contrast
through
10/9/07 4:16:02 PM
10/9/07 4:16:02 PM