Advertisement
James Martin Food Processor
1. Place the cutting disc on to the top of the drive shaft, with the cutting blade
you require uppermost.
NOTE: the cutting disc cannot be fitted with the blade in place.
2. Fit the lid with the locking tab just to the left of the handle and turn
anti-clockwise to lock into place - ensuring that the top of the drive shaft
locates into the centre of the lid. The processor is now ready to use.
Tips
1. Use fresh ingredients for best results.
2. Don't cut food too small. Fill the width of the feed tube as this prevents
food from slipping sideways.
3. When using the slicer disc the size of the slice will depend on how you
place the food in the feeder tube. Food placed to fill the feed tube will
result in larger slices.
4. There will always be a small amount of waste on the disc or in the bowl
after processing.
Using the Blender
1. Your blender has a removable blade for easy cleaning. Ensure the blade
assembly is securely in place with the sealing ring properly fitted. To
remove or replace the blade assembly twist in the direction of the arrows.
2. Place the jug onto the main unit lining up the arrow on the jug with the
unlock symbol on the main unit and turn anti-clockwise to lock into
place (see fig1a).
3. Add ingredients. Fit the lid securely, the blender is now ready to use.
IMPORTANT: Always cool hot liquids before blending.
NOTE: If blending warm liquids remove the filler cap and start at a low speed
increasing to high speed if required. the pulse setting is not recommended
for warm liquids. Do not blend warm liquids over the 1l level, and always take
care to avoid contact with any steam.
Tips
1. When blending thick mixtures, e.g pâtès and dips they may need scraping
down, if they are difficult to process add more liquid.
2. You can always remove the filler cap and add extra liquid as the machine
is running to achieve the desired consistency.
3. When crushing ice add 15ml (1 tbsp) water to approx every 6 ice cubes
and pulse using the turbo button.
Using the Citrus Juicer
1. Place the drive shaft and processor bowl onto the main unit.
2. Attach the juicing filter aligning the locking tab with the handle on the
processor bowl. Lock into place.
3. Place the juicing cone onto the centre of the juicing filter.
4. Cut your citrus fruit in half and place flesh side down onto the juicing cone.
5. Turn on to speed 1 to juice.
6. Your juice is ready to be poured out and used.
8
Advertisement
