Advertisement
Dough Blade
The dough blade is ideal for combining dough and making pastry. Place the
blade into the centre of the bowl over the top of the blade shaft (see fig2). Place
the dry ingredients in the bowl and add the liquid down the feed tube whilst the
machine is running. Process until a smooth elastic ball of dough is formed this
will take 30 secs.
Re-knead by hand only. Re-kneading in the bowl is not recommended as it may
cause the processor to become unstable.
Fig 2
Stainless steel blade
Fit the Blade shaft into the centre of the processor bowl, then place the required blade over the
blade shaft.
NOTE: Do not over fill, if a large quantity is required it is better to do it in
batches.
Fit the lid with the locking tab just to the left of the handle and turn anti-
clockwise to lock into place - ensuring that the top of the drive shaft locates into
the centre of the lid. The processor is now ready to use.
NOTE: Do not use the lid to operate the processor, always use the on/off
control.
Tips for using the blades
1. For best results cut food such as meat, bread, vegetables into similar sized
pieces (approx 2-3 cm) before processing.
2. Biscuits should be broken into pieces and added down the feed chute
whilst the machine is running.
3. When making pastry use fat straight from the fridge cut into 2 cm cubes.
4. You can always pour additional liquid through the feed chute whilst the
machine is running to adjust the consistency of the mixture.
5. Always take care not to over process the ingredients, keep checking the
mixture you can always process for longer if required.
Using the processor bowl with the stainless steel cutting disks.
The stainless steel cutting disc will allow you to slice and shred, carrots,
potatoes, cucumber, courgette and onions. The disc has two cutting sides one
for slicing and one for shredding. Place the disc with the function you require
uppermost e.g. if you want to slice a carrot have the slicing blade facing
upwards.
The grating disk will grate Cheese and finely grate vegetables. Fit the lid and
using the pusher, gently push the desired food on to the blade, do not force.
Blade Shaft
James Martin Food Processor
Dough blade
7
Advertisement
