Download Print this page

Jumpking JKBK3IN1 Owner's Manual

Backyard - 3 in 1 trainer

Advertisement

Quick Links

ASSEMBLY, INSTALLATION, CARE, MAINTENANCE AND USER INSTRUCTIONS
- The 3 in 1 Trainer is designed to be used by children ages 6+.
- Carefully read this entire instruction manual before you start to assemble or use the 3 in 1 Trainer.
- You must follow all instructions and warnings while using the 3 in 1 Trainer.
- The 3 in 1 Trainer must be anchored. You should consult your local contractor regarding the best
way to anchor the 3 in 1 Trainer at your location of installation.
- Assembly requires at least two adults.
For Customer Service, please call 1-877-927-8777 or visit www.jumpking.com
MODEL: JKBK3IN1
3 in 1 Trainer
OWNER'S MANUAL
FOR RESIDENTIAL USE ONLY
!
WARNING
Save this instruction manual for future reference
Monday – Friday 9:00 AM – 5:00 PM Central Time

Advertisement

loading
Need help?

Need help?

Do you have a question about the JKBK3IN1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jumpking JKBK3IN1

  • Page 1 3 in 1 Trainer at your location of installation. - Assembly requires at least two adults. Save this instruction manual for future reference For Customer Service, please call 1-877-927-8777 or visit www.jumpking.com Monday – Friday 9:00 AM – 5:00 PM Central Time...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS IMPORTANT INSTRUCTIONS AND WARNINGS 3 - 4 CARE AND MAINTNENANCE CHECKLIST TOOLS NEEDED PARTS LIST 7 - 9 ASSEMBLY AND INSTALLATION INSTRUCTIONS 10 - 15 ANCHORING WARRANTY...
  • Page 3: Important Instructions And Warnings

    Extreme caution should ALWAYS be exercised when assembling, disassembling, using , adjusting, moving or locating the Jumpking Backyard 3 in 1 Trainer. Children under the age of 12 should not move the 3 in 1 trainer or handle steel ground stakes.
  • Page 4 When the Jumpking Backyard 3 in 1 Trainer shows any signs of weakness, you must stop using the product immediately, properly store the set or restrict access by users until the condition is resolved.
  • Page 5: Care And Maintnenance Checklist

    - Remove any plastic parts as specified by the manufacturer and take indoors or do not use. Disposal Instructions: - The owner is to disassemble and dispose of the Jumpking Backyard 3 in 1 Trainer in such a way that no unreasonable hazards will exist at the time the equipment is discarded.
  • Page 6: Tools Needed

    TOOLS NEEDED Please gather the following tools prior to assembling this equipment. TOOLS NOT INCLUDED: Description: Phillips head screwdriver Description: Mallet (May be needed for installing anchor) Description: Stool or Step ladder...
  • Page 7: Parts List

    Parts Listing: Item Discription Picture number Bottom tubing marking C Bottom tubing marking G Center connector Left connector marking C Right connector marking G Left wing bottom tube marking A Left wing bottom tube connector marking A Right wing bottom tube marking B Right wing bottom tube connector marking B...
  • Page 8 Parts Listing: Item Discription Picture number Right wing top curve tube marking B Right wing bottom curve tube marking B Front panel straight tube marking C Front panel straight tube marking G Front panel curve tube marking D Front panel curve tube marking F Top 4 way connector marking E...
  • Page 9 Parts Listing: Item Discription Picture number Back support pole top Back support pole bottom Back support foot pad Spring Front panel Left wing panel Right wing panel Set of 8mm x 50mm Screw Description: 1) 50mm x 8mm Screw (A) 2) 18.23mm dia x 8.11mm inner dia Washer 3) 12.75mm dia x 8.34mm inner dia Spring washer...
  • Page 10: Assembly And Installation Instructions

    Step 1 - Assemble the base frame 8mm x 50mm Screws (A) 4 pcs...
  • Page 11 Step 2 - Assemble the wings...
  • Page 12 8mm x 50mm Screws (A) 2 pcs Step 3 - Assemble the main frame 8mm x 40mm Screw - 2 sets (B)
  • Page 13 Step 4 - Assemble the Basketball hoop On back side of basketball board Use 8mm x 30mm Screws - 4 sets (D) Use 8mm x 15mm Screws 1 pc (C) Set up the back support pole (Part 22, 23, 24)
  • Page 14 Step 5 - Assemble the Front panel Install the top and bottom springs to the tubing by using Spring pulling tool (31). Hook the spring tool onto end of spring, and pull until the spring can be slotted into the spring slot on the frame.
  • Page 15 Step 6 - Assemble the springs to 2 side wing panels...
  • Page 16: Anchoring

    Step 7 - Anchoring the frame Back Front Metal peg Metal peg Metal peg Part 7 marking A Part 7 marking B Part 24 The following anchoring options may be considered: Metal Peg - If your soil is hard (clay, etc.), the metal peg may be suitable. - Be sure that the product is located on level ground.
  • Page 17: Warranty

    The various components of the trampoline/enclosure are warrantied against defects and workmanship for the time periods specified as follows: Steel Frame: 1 Year Sewing and all Other Parts: 6 Months www.jumpking.com www.jumppod.com Customer Service Toll Free No. 1-877-927-8777 3970 Lindbergh Drive, Addison, TX 75001 Monday –...