Landis McKay Stitcher 77 Operator Instructions Manual page 3

The Landis Model "77" Chainstitch McKay Stitcher is the result of many years of experience in the
design and manufacture of shoe machinery, and has been especially designed to fit the needs of the shoe
rebuilder of today and to enable him to increase his business through the repair or resoling of ladies' shoes.
The Model "77" McKay Stitcher is simple in design, constructed of the finest materials and manu-
factured with unusual accuracy, which is conductive to low cost of operation and low upkeep. In order to
get the benefit of the features of this Stitcher the only necessary contribution by the operator is reasonable
care in preparing and fitting up his work. If this is done in a first-class manner, excellent results will be
obtained.
When sewing on the Model "77" McKay Stitcher no anxiety need be felt on the part of the operator
should small trifles arise at times, which can be eliminated by consulting the following instructions which
will enable you to care for your machine properly and keep it in perfect adjustment. For your particular
benefit, it is desired that you familiarize yourself as much as possible with the operation of the machine.
The following instructions will be of considerable assistance towards helping you in maintaining, adjust-
ing and operating your machine. Remember that the Model "77" McKay Stitcher is a quality built ma-
chine, as are all Landis Machines. Clean it, oil it, and it will render you perfect service.
The Fayscott Landis Machine Corp. will continue to manufacture the Model "77" McKay Stitcher
as a Landis Product and we reserve the right to make changes or improvements at any time, without
thereby incurring any obligation either to install the same on machinery or equipment previously sold, or
install the old part, which has been changed, improved or omitted in new machines or equipment subse-
quently sold. Prices and equipment subject to change without notice.
MODEL "77" CHAINSTITCH
INTRODUCTION
-1-
FAYSCOTT LANDIS MACHINE CORP.