Dr. Trust Micro Mesh Nebulizer Manual page 18

1. Remove the medication chamber from
the nebulizer:
Press the PUSH button on the rear side
of the main unit, and push the medication
chamber toward the front side of the main
unit.
2. Re-attach the medication chamber to
the nebulizer
Attach the medication chamber correctly
as shown in the figure.
Attention
 To avoid damaging the nebulizer,
please ensure the PUSH button is
pressed down before pushing the
medication chamber forward.
 To avoid rupturing the mesh, please
do not poke it with your finger or other
foreign object.
Attention
 Please ensure that the medication
chamber is attached correctly; otherwise,
it may result in a bad connection and
cause the nebulizer to not function
properly.
 Please keep the electrodes of the main
unit and medication chamber clean;
otherwise, the nebulizer may not function
properly.
 Please clean the medication chamber
before using.
18