Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pro Dunk Hoops Manuals
  4. Landscape Lighting
  5. Goal Light LED
  6. Owner's manual

Pro Dunk Hoops Goal Light Owner's Manual

Hide thumbs Also See for Goal Light:

Advertisement

Quick Links

Download this manual
Pro Dunk® Goal Light
OWNER'S MANUAL
Thank you for purchasing our Goal Light. We try hard to ensure that our products
are of high quality and free of manufacturing defects and of missing parts. How-
ever, if you have any problems with your Goal Light, such as a manufacturing
defect or a missing part please contact us at the following:
Toll Free: 1.888.600.8545
Web: www.produnkhoops.com
FAX: (281) 357-4822
Support:
www.produnkhoops.com/support
Read this manual all the way through before starting
assembly of your Goal Light. Then read each step
completely before beginning installation.
Lighting System
Pro Dunk® Hoops
22047 Lutheran Church Rd.
Tomball, TX 77377
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Goal Light and is the answer not in the manual?

Questions and answers

Related Manuals for Pro Dunk Hoops Goal Light

Summary of Contents for Pro Dunk Hoops Goal Light

  • Page 1 Lighting System OWNER’S MANUAL Thank you for purchasing our Goal Light. We try hard to ensure that our products are of high quality and free of manufacturing defects and of missing parts. How- ever, if you have any problems with your Goal Light, such as a manufacturing defect or a missing part please contact us at the following: Toll Free: 1.888.600.8545...
  • Page 2 Bill Of Materials Ref. Qty. Description 3 Piece Pole System (with pre-assembled power cable) Main Pole System Support Arm Light Assembly (pre-assembled) Halogen Light Bulbs Wire Light Guards Main Pole Mount Bracket 10mm x 3cm Hex Bolts 10mm x 7cm Hex Bolt 10mm x 2.5cm Hex Bolt 10mm Flat Washer 10mm Lock Washer...

  • Page 3: Safety Instructions

    Safety Instructions  Check the Goal Light System on a regular ba- IMPORTANT sis to ensure that there are no signs of dete- It is the responsibility of purchaser to ensure that rioration or corrosion, loose hardware, or all installers and players fully comply with the de- damaged parts.

  • Page 4: Installation Overview

    Installation Overview In order to have safe fun and a long use of your Goal Light, please note and heed the following: 1) Prior to Goal Light assembly, check for power lines within 35 feet of your basketball system. If power lines are within 35 feet of your basketball system do not install the Goal Light System.

  • Page 5: Required Tools

    Required Tools Bolt/Nut Sizes (2) Crescent Wrenches  (3-4) 8ft ladders  Socket/Wrench Sizes Recommended (1) Phillips Screw Driver  17mm ...
  • Page 6 Assembly 1) Bulb Assembly WARNING— Be very carful not to touch the Halogen Light Bulbs (D) with your hands. Using a phillips screwdriver, remove the screw on the top of the front face of the Light Assem- bly (C). Then remove the glass cover and insert the Halogen Light Bulb (D) into to Light As- sembly (C).
  • Page 7 2) Assemble Wire Light Guards Using a small Philips screwdriver remove the screw located on the front face of the Light As- sembly (C). Be careful to not lose the small screws. Place the Wire Light Guard (E) where all 4 tabs are installed between the lamp frame and glass.
  • Page 8 3) Assemble Pole System Find a large area to assemble the 3 Piece Pole System (A) and Main Pole System Support Arm (B). Slide the 3 Piece Pole System (A) together and locate the 2 threaded holes that are used to secure the 3 Piece Pole System (A) together.
  • Page 9 4) Plug Lamp Assembly into Pole Assembly Connect the waterproof connector on the Lamp Assembly (C) to the waterproof connector on the 3 Piece Pole System (A). Line up connectors and push firmly together to create a good connection. Twist the screw connector to create a water resistant seal.
  • Page 10 Goal Light into a power source. Ensure that the Light Assem- bly (C) lights up. If they do not, unplug Goal Light from power and allow the lamps to cool and adjust the light bulb inside as it might not have a good connection. Repeat step 5 until both Halogen Light Bulbs (D) light up.
  • Page 11 With 3-4 people and 3-4 ladders slide the Goal Light Pole into the Main Pole Mount Bracket (F) that is attached to the Pro Dunk® Main Pole. Level the Goal Light Pole from side to side and then secure the Pole Mount Bracket with 2 10mm x 3cm Hex Bolts (G).
  • Page 12 Using an outdoor rated extension cord plug your Goal Light into a power source. To avoid in- jury, when not using your Goal Light, unplug from any type of power source. Do not use your Goal Light during or right after any type of precipitation.
  • Page 13 Examples: grass clippings, moisture, garbage, dirt, etc. 2) If you see any signs of rust on the Goal Light system remove the loose paint, sand the area with a medium grit sandpaper and apply outdoor enamel to the affected area.
  • Page 14 Hoops Inc. Goal Light Limited 90 Day Warranty Hoops Goal Light basketball light systems are warranted to the original purchaser to be free from defects in material or workmanship for 90 days of ownership by the original retail purchaser. The word “defects” is defined as imperfec- tions that impair the use of the product.