Advertisement
1
O = Try Me
X = O
= ON
X
O
Move the switch on the back of your
creature to the ON position.
3
Insert the peg on the arms, legs or headpiece
into any opening on the creature. The pegs
are keyed and will need to be inserted
correctly for a perfect t. It will activate a
monster sound once attached.
5
2
QUICK START
2
Pull the tongue to hear its monster sound.
4
Pull the tongue to hear the monster
sounds. Each time you attach a part and
pull its tongue, new monster sounds will
be added.
UNBOX AGAIN AND AGAIN
1
Lift the window panel to lower the platform.
3
Lift the panel with the trigger handle. Lock
the trigger panel with the front panel. Then,
insert the creature's arms, legs and headpiece
through the sides.
5
To unbox, turn the handle clockwise and push down.
Watch your creature explode out!
IMPORTANT INFORMATION
• Function may be limited when the product is in TRY ME mode.
• Wipe clean with a damp cloth and keep moisture away from battery compartment.
• Turn the switch on your creature to the "OFF" position after use to conserve battery.
2
While holding the panel in place, insert your
creature rst. Align the openings on the
bottom of your creature with the platform.
4
Close the side panels and turn the handle
counterclockwise to lock.
3
Advertisement
