How Can I Keep The Device Still; Tightening The Bracket Joint - Uniden TRAX430 User Manual

How can I keep the device still?

If the whole mount shifts out of position, the suction cup probably
isn't getting a good grip on the windshield. Try removing the mount
from the windshield and re-installing it. See page 22 for hints on
getting the suction cup to stick better.
If the device shifts out of position even though the suction cup itself
stays in place, try tightening the bracket joint.
T
iGhTeninG The BRAckeT joinT
1) Remove the mount from your windshield.
2) Lift the
adjustment
lock, and
twist the
lock handle
clockwise
two, maybe
three turns.
3) Flip the
adjustment
lock back
down and see if the bracket still moves. If it does, repeat step 2.
Twist the Twist the
2 2
adjustment adjustment
lock clockwise lock clockwise
a few turns to a few turns to
tighten the tighten the
bracket joint. bracket joint.
I Have a Question
Lift the Lift the
1 1
adjustment adjustment
lock. lock.
Page 75