Advertisement
Quick Links
Advertisement
Related Manuals for GN ReSound ENZO Q
Summary of Contents for GN ReSound ENZO Q
- Page 1 ReSound ENZO Q fitting guide A guide for professionals...
- Page 2 2. Assign the hearing instruments to the right and left ears by choosing the appropriate This fitting guide gives an overview of how to fit ReSound ENZO Q wireless hearing radio button for the right and left sides. It is recommended to beep the instrument instruments with ReSound Smart Fit 1.6.
- Page 3 Connection flow Once the hearing instruments have been selected, the connection process will begin. 1. Select the Physical Properties of the instrument. 3. Calibrate the hearing instruments to activate DFS Ultra II. 2. Verify the correct connected hearing instruments. Click ‘Continue’ to proceed to the Patient Profile screen or pair accessories by clicking ‘Accessories’.
- Page 4 3. When the accessory is successfully paired, the accessory image will appear in color Fitting screen with a unpair button below. In the Fitting screen, you can adjust the Gains, Advanced Features, Environmental Optimizer II and Device Controls. You can access additional tools and features in the upper right menu (see inset).
-
Page 5: Advanced Features
Advanced features Advanced features are prescribed per program, and can be modified from their default settings selecting from the drop down box or by moving the slider to the desired value. The defaults are set based on the program environment, which is selected in the program tab. - Page 6 DFS Ultra II Wind Guard This is the feedback control. It is activated when the devices have been calibrated for DFS Ultra. The default Wind Guard applies noise reduction specifically for windy situations. The default setting is Off. If a patient setting is Mild.
- Page 7 Note: To transfer settings from a legacy fitting to ReSound ENZO Q fitting, select ‘use session’ in the fitting data mismatch screen of the connection flow. To start a...
- Page 8 Replacing one hearing instruments of a pair Connecting during a follow-up When returning for a follow-up visit, the software will open to the last saved session. Depending on the saved preferences, the session will open to either the Patient Profile screen or the Fitting screen.
- Page 9 © 2020 GN Hearing A/S. All rights reserved. ReSound is a trademark of GN Hearing A/S. Apple, the Apple logo, iPhone iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Need help?
Do you have a question about the ReSound ENZO Q and is the answer not in the manual?
Questions and answers