Access To The Field - Transport - UNIA Plow Series Operating And Maintenance Manual

b) Disconnecting
•
lower the machine onto a flat and hard surface
•
depressurize the machine hydraulic system by shifting the tractor hydraulic lever
to its free (floating) position
•
open the leg (E) to its resting position (vertical)
•
disconnect the hydraulic hoses, the tractor upper coupler (A), and the suspension axle
(D)
3.4 Access to the Field – Transport
•
width of the machine can exceed 3.0m depending on the accessories
•
after finishing your work, clean the machine from soil and other dirt
•
clean the warning components (lighting – optional accessory) from dirt
•
a unit consisting of a tractor and agricultural machine connected to it must meet the same
requirements as the tractor alone
•
adjust the chains tensioning the side tow bars (stabilizers) of the tractor accordingly before
driving; they should limit the excessive side movements of the unit
•
observe the 'Road Traffic Law' regulations when driving on highways
•
warning signs (A) should be dismantled for field work, so that they don't get
damaged
OPERATING AND MAINTENANCE MANUAL PLOW
Fig. 12. Transport
- 17 -