Table of Contents
Advertisement
Install a New Oracle F160 Flash Card (Server Power-Off)
Oracle F160 Flash Card Installation Overview
To install your Oracle 1.6TB NVMe PCIe 3.0 Flash Card into a system, refer to the following
table:
Steps
1.
2.
Refer to the server's service manual for additional information.
Related Information
"Oracle F160 Flash Card Service Overview" on page 37
■
"Replace Oracle F160 Flash Card (Server Power-Off)" on page 39
■
"Replace Oracle F160 Flash Card (Server Power-On)" on page 45
■
Install a New Oracle F160 Flash Card (Server Power-Off)
To install a new Oracle Flash Accelerator F160 PCIe Card into a supported server:
Note -
Prepare the Oracle F160 Flash Card for installation.
1.
See
"Preparing the Oracle F160 Flash Card for Installation" on page
Back up your data, as required, before changing your server configuration.
2.
3.
Identify a supported and available PCIe slot in the server.
Refer to the server's service manual for PCIe slot locations in the server.
30
Oracle Flash Accelerator F160 PCIe Card User Guide • April 2016
Task
Prepare the Oracle F160 Flash Card for installation.
Carefully unpack the Oracle F160 Flash Card. Inspect
the card for damage. Follow ESD precautions.
Insert the Oracle F160 Flash Card in an available
PCIe slot with server power in the off state.
or
Insert the Oracle F160 Flash Card in an available
PCIe carrier with server power in the on state.
Refer to the server's service manual for PCIe card installation instructions.
See
"Preparing the Oracle F160 Flash Card for
Installation" on page 21
"Install a New Oracle F160 Flash Card (Server
Power-Off)" on page 30
or
"Install a New Oracle F160 Flash Card (Server
Power-On)" on page 33
21.
Advertisement
Table of Contents
