Advertisement
Quick Links
Operating & Safety Guide 623
EQUIPMENT CARE
Never use the plasterer' s light for anything other
than its intended purpose. If it will not do what you
Hire Shops
want, assume you have the wrong equipment for the
job. Contact your local HSS Hire Shop for advice.
Never expose the equipment to excessive
moisture, dust or dangerous/corrosive chemicals.
Keep the equipment clean. You will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
Handle the equipment with care. Never over-tighten
or cross-thread thumbscrews and fittings and remember
that even site lighting contains delicate bulbs and
will be damaged by rough treatment.
Always switch OFF and unplug the equipment
before making any alterations or adjustments to it.
When not in use, store the equipment somewhere
clean, dry and safe from thieves.
FINISHING OFF
Having switched OFF and unplugged the light,
wait for it to cool.
Finally, neatly coil the flex ready for return to your
Plasterer' s
local HSS Hire Shop.
Lights
Fluorescent lamps specially
designed to minimise shadows.
Can be linked together if required.
Contact your local
0990 282828
©HSS Hire Service Group Plc 1997 No. 623/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Code 57413
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HSS Hire 57413
Summary of Contents for HSS Hire 57413
- Page 1 If it will not do what you Hire Shops want, assume you have the wrong equipment for the job. Contact your local HSS Hire Shop for advice. Never expose the equipment to excessive moisture, dust or dangerous/corrosive chemicals.
- Page 2 ON and check that it works as it should. power supply and away from the work area where plugging into the power supply. In case of difficulty, contact your local HSS Hire Shop. people can’t trip over it.
Need help?
Do you have a question about the 57413 and is the answer not in the manual?
Questions and answers