Check Steering Performance; Check Trigger Response; To Tune The Steering Trim; To Tune The Throttle Trim - HBX SURVIVOR XB Instruction Manual

Ensure reliable steering performance.
1)Place the steering wheel at Center to enable the vehicle to run straightly in line.
(NOTE: Flipping to trim the steering wheel is occasionally needed. It largely depends on the conditions of
the terrains on which the vehicle runs.
2)Turn the steering wheel to the left, and the car turns left.
3)Turn the steering wheel to the right, and the car turns right.
The trigger is unmoved and the vehicle is static. Tune the steering trim to enable the front wheels to be aligned.
Under this case, the steering Center Point is set. You can tune this switch to obtain your desired Left/Right
steering angles.
Place the vehicle with four wheels off ground. Trim the switch and you will see the wheels run either forwards
or backwards. When the wheels are trimmed to stop, this point is throttle Center Point.
A.Pull the trigger to accelerate, release it to decelerate, and push it to brake.
B.Release the trigger to Center to stop.
C.Release the trigger to Center, and push it a second time to go backwards.