Kia Sportage 2008 Manual page 129

7/6/12 https://www.kiatechinfo.com/viewer/toc_print.asp?vehicletype=Passenger&mfrcode=KM&area=KM...
Terminal & Connector Inspection
1. Visually inspect all connectors related to the affected circuit for damage and secure connection.
2. Inspect terminals for damage and corrosion.
Avoid damaging connectors during the inspection process.
3. Are any problems found?
► Go to next step.
► After repairing the trouble part, check whether DTC occurs or not.
Inspection Procedure
1. PREPARATION
(1) Turn the ignition switch to LOCK.
(2) Disconnect the negative (­) terminal from the battery and wait for at least 3 minutes.
(3) Remove the DAB module and disconnect the DAB connector.
(4) Disconnect the connectors of the PAB, SAB, CAB, BPT, BUPT, FIS and SIS.
(5) Disconnect the SRSCM connector.
2. CHECK OPEN CIRCUIT
(1) Measure resistance between the terminal 1 of STPS harness connector and the terminal 38(35) of SRSCM
harness connector.
(2) Measure resistance between the terminal 2(6) of STPS harness connector and the terminal 37(36) of SRSCM
harness connector.
https://www.kiatechinfo.com/viewer/toc_print.asp?vehicletype=Passenger&mfrcode=KM&area=KM... 129/227