4. Unscrew protective cap from the
filler neck.
5. Open AdBlue canister.
6. Mount one end of the hose on the
canister and screw the other end
on the filler neck.
7. Lift the canister until it is empty, or
until the flow from the canister has
stopped.
8. Place the canister on the ground
to empty the hose, wait
15 seconds.
9. Unscrew the hose from the filler
neck.
10. Mount the protective cap and turn
clockwise until it engages.
Notice
Dispose of AdBlue canister
according to environmental
requirements. Hose can be reused
after flushing with clear water before
AdBlue dries out.
Driving and operating
Electric drive unit
Operation
The vehicle uses an electric drive unit
with a 1-gear transmission. The
selector lever is located on the centre
console between the seats.
P : park position, wheels are locked,
engage only when the vehicle is
stationary
R : reverse gear, engage only when
the vehicle is stationary
N : neutral
D : drive mode, low recuperation
B : regenerative braking
113