Quick Start - White's GOLDMASTER Series Owner's Manual

GMX SPORT Quick Start
Quick Start Instructions
With the GMX properly assembled and the batteries installed, follow
the instructions below to start finding those nuggets!
1
Turn the GMX on by pressing the POWER button.
Set the VOLUME to your preference (tap Speaker icon, use Up and
2
Down buttons).
Set the THRESHOLD to a faint hum (hold Speaker icon, use Up
3
and Down buttons). For silent search, turn this all the way down
Set the SENSITIVITY to a level that ensures smooth operation (Up
4
and Down buttons).
Set the SAT to get a stable threshold (hold Music button, use Up
5
and Down buttons).
Select your preferred AUDIO mode (tap Music button). With the
6
Music icon displayed you are in Beep mode. With no icon, you are
in mode.
Zip
Enable IRON CANCEL if you experience difficult ground condi-
7
tions, hot and cold rocks, or iron trash (tap Nail button).
Lower the search coil to the ground, then "pump" the coil up and
8
down a couple of times and XGB will automatically balance or
track out the ground mineralization. Or you can Lock the tracking
(Lock button) and perform a ground grab (Bullseye button).
Start swinging the search coil in wide sweeps that overlap each
9
other.
If you experience false signals or constant beeping or popping,
10
turn the SENSITIVITY down a bit, adjust the SAT up, or enable
IRON CANCEL.
6