Intercom/Call Transfer Feature; Flash And Call Waiting; New Message Led - Uniden DCT 5285 Owner's Manual

Intercom/Call Transfer Feature

Flash and Call Waiting

You must subscribe
through your local
telephone company
to receive Call
Waiting Service.

New Message LED

[ 36 ] B A S I C S
When speaking on the base
1) Press talk/flash or speaker on the handset to initiate the
3-way conversation.
2) To hang up, return the handset to the cradle, or press the end
key on the handset. The base will still be connected to the call.
If you purchase a DCX520 extra handset, the phone permits 4-way
"4-way Conferencing" on page 66 for details.
conversation, see
Intercom and transfer features are available for your phone. See "Intercom/Call Transfer
Feature" on page 67 for details.
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press talk/flash (or flash on the base)
to accept the waiting call. There is a short pause, then you will
hear the new caller. To return to the original caller, press
talk/flash (or flash on the base) again.
The new message LED on the handset is designed to work with your answering system.
The LED flashes when you have new messages in your answering system.
The LED stops flashing when all new messages are played back (see "Using your
Answering System" on page 58).