Creating A Data Network - Sennheiser Evolution Wireless G4 Instruction Manual

Creating a data network

You can monitor and control one or more EM 300-500 G4s via a network
connection using Sennheiser Wireless Systems Manager (WSM) soft-
ware.
Automatic frequency setup can also be performed over the network
without the WSM software. See "Easy Setup menu item".
To connect the EM 300-500 G4 to a network:
Connect a network cable with an RJ-45 connector (to the Ethernet
▷
socket on the rear side of the EM 300-500 G4.
Connect the other end of the network cable to a network switch.
▷
►
For more information about controlling devices via the Sennheiser
Wireless Systems Manager (WSM) software, refer to the instruc-
tion manual for the software. You can download the software here:
www.sennheiser.com/wsm
Installing the EM 300-500 G4
27