TASKA Prosthetics Hand V1.1 Quick Start Manual page 5

3. Control
Fault light
If this light stays on, there is an
internal error. You won't be able to
move the hand until you turn it off
and on again.
Run the HandCal software to
check for problems with your
hand. Contact your clinician if
this happens regularly.
Home grip set
Press this button to toggle
between flexi-tool and
general grasp. To select
pincer precision grip, press
the button for one second.
Battery light
Light flashes every 10 seconds when
the battery reaches 10%. When the
battery is flat, the light will stay on and
you won't be able to move the hand.
do more
EMG functions enabled
Light indicates when EMG grip triggers or
the EMG sensors are turned on and off.
EMG on EMG off
EMG functions
Change this button's function using
the HandCal software to turn off EMG
sensors or turn off EMG triggers.
Turn sound on/off with one second hold.
Button grip set light
Light flashes momentarily
when the first grip in the
button group is selected.
Button group triggers
Press this button to cycle
through your predefined
button group grips.
Press for one second to
turn Bluetooth on or off.
Bluetooth light
Illuminated when enabled.