BCG Traditional Series Instructions Manual page 11

T R A D I T I O N A L S E R I E S S T R A I G H T M O D E L • G R E E N H O U S E I N S T R U C T I O N S
Front Gable End Assembly
5. End Rafter - when fastening end rafters to the
corner posts, leave a 1/8" space for the gutters
to slide through. The punch marks in the end
rafter will line up with end glass bars. Slide the
bolts in the top of the glass bar before you put
on the end rafter. (See Pic H.)
6. At this point, you can install all the end glass
bars. (A smaller greenhouse will only have
1-bar above the door). (See Pic I.) The centre
bar uses a 1/4" washer to keep the end rafters
together.
7. Smaller sized greenhouses
have a horizontal brace.
(See Pic J.) Larger sized
greenhouses will have a
diagonal brace from the top
door frame plate to base/sill
2" from the corner post.
H
I
J
Door
Frame
– 10 –
(contd.)
End
Rafter
Corner
Post
Corner
Post