Related Manuals for Ayyeka WAVELET 4R
Summary of Contents for Ayyeka WAVELET 4R
- Page 1 AYYEKA WAVELET SCHEMATIC WAVELET 4R QUICK START Exte (Bot GUIDE AYYEKA April 2020 P/N 0100711 Rev 1...
- Page 2 It is important that you read the Quick Start Guide in a controlled environment prior to installation. Set up, activate, and successfully test the entire system (Wavelet 4R, sensors, and antenna connection) indoors, in a controlled environment, before going to the field for installation.
- Page 3 The WARRANTY offered by Ayyeka covers only Ayyeka supplied hardware and software for the duration of the warranty period as per the warranty terms and conditions. AYYEKA IS NOT LIABLE for damage or injury as a result of handling, installation, or maintenance of its supplied systems.
- Page 4 SCHEMATIC External (Bottom) AYYEKA 13.3 cm (5.2 in) External (Bottom) BOTTOM Cellular Sensor Input Port...
-
Page 5: Getting Started
GETTING STARTED BASIC WAVELET KIT Wavelet Device & Wavelet Activator GETTING STARTED Protector GETTING STARTED M12 Field Attachable M8 Female Field Attachable Sensor Connector Power Connector (optional; Ordered (optional; see page 16) separately) - Page 6 Zip Ties, Screws, and Cellular Antenna Anchors (REQUIRED; ordered separately) Other tools and/or materials may be required (not included): Rotary Hammer Electric Screw Driver...
- Page 7 Wait for at least 15 minutes, then log in to the user Log in to interface at home.ayyeka.com to home.ayyeka.com to make ensure that cellular signal sure stable communication has been recently updated is confirmed in the last few minutes.
-
Page 8: Sensor Connection
SENSOR CONNECTION Connect the sensor cable assembly with the field attachable connector to the mating panel connector on the Wavelet. Turn the adjustable stainless steel end piece to secure the field attachable connector to the Wavelet. CAUTION: Do not turn the black plastic hood of the connector. -
Page 9: External Antenna Connection
Place the magnetic Wavelet Activator on the embossed Ayyeka logo on the front of the Wavelet enclosure. Wavelet will initiate a 15 minute test mode of high frequency sampling and transmission. The device will then return to its... - Page 10 2. Select ”Enter Key Manually”. The Mobile Pair Key is found in the StreamView user interface in the Devices tab. Access the Ayyeka user interface at home.ayyeka.com using your log-in credentials. Expect data to appear between 5 – 10 minutes after the test mode is initiated.
- Page 11 Wavelet installation installation successfully and location and activate again can begin collecting and (step 3). If the problem viewing your data! persists, contact Ayyeka for assistance. support@ayyeka.com +1 (310) 876-8040 (US) +31 40 209-1001 (EMEA)
- Page 12 After the Wavelet completes the transmission process, place the Wavelet protector above the connector ports and secure the Wavelet protector into the Wavelet enclosure. Upper Clips Lower Clips Attaching the protector a. Insert the two lower clips into the two lower holes of the Wavelet enclosure.
- Page 13 Secure the Wavelet on a wall, pipe, or other secure mounting location using zip ties or screws. Wall Mounted Pipe Mounted...
- Page 14 YOUR WAVELET 4R IS NOW SUCCESSFULLY INSTALLED!
- Page 15 External (Bottom) WAVELET PINOUT – ANALOG PANEL CONNECTOR – M12 8-PIN MALE L CONNECTOR #1 – M12 8-PIN MALE Connector Function Description ction Name Pin Assignment Pin # Assignment nal+ 4-20mA or 0-24V Input #1 Front Front Signal 4-20mA or 0-24V Input #1 mmon Negative (-) Signal...
-
Page 16: Power Connector Pinout
flats 13 POWER CONNECTOR PINOUT Width across flats 12 If using an external power source, refer to the pinout below: termination Ø1,9 Ø13,7 EXTERNAL POWER: Max. external cable diameter see table M8 3-Pin Female Power Connector Negative (-) + Installation Tool for Wire Termination 5-28VDC (+) Connection... - Page 17 NOTES...
- Page 18 QUESTIONS? www.ayyeka.com support@ayyeka.com +1 (310) 876-8040 (US) +31 40 209-1001 (EMEA)
Need help?
Do you have a question about the WAVELET 4R and is the answer not in the manual?
Questions and answers