Xdock Qi Behaviour When Initiating Or Stopping Qi Charging; Setting The Clock; Important Note Before Setting Alarms; Setting Alarm 1 - Kitsound XDOCK Qi User Manual

XDock Qi behaviour when initiating or stopping Qi charging

The XDock Qi can behave in several ways when you place/remove your device to initiate/stop Qi charging:
1. If your XDock Qi is playing the radio when you start Qi charging, or when you remove your device,
the radio will continue to play. If you want to play music via Bluetooth, you'll have to change mode.
2. When you remove your device from the XDock Qi while you are playing music via Bluetooth, it will
continue to play. If you stop the music on your device the Bluetooth connection will turn off after
15 minutes.

Setting the clock

1. With the XDock Qi in standby mode, long press Play/pause (1) and it will automatically enter 24H mode
2. Press Plus Icon (3) or Minus Icon (2) to increase or decrease the hours, then press Play/pause (1) to confirm
3. Press Plus Icon (3) or Minus Icon (2) to increase or decrease the minutes, then press Play/pause (1) to confirm
4. The time will now be set
Note: To make sure the time set is not lost during a power cut, please insert 2 AAA batteries
(not included) into the battery compartment (13).
10

Important note before setting alarms

If you want to wake up to the radio, set the radio station you want first before setting the alarm. Go to radio
mode, choose your station. Then follow the setting Alarm 1 & 2 instructions below.

Setting Alarm 1

1. Long press Alarm 1 (4) to start the set up
2. Press Next (3) or Previous (2) to select between Buzzer or Radio to wake you up, followed by Alarm 1 (4) to confirm
3. Press Plus Icon (3) or Minus Icon (2) to change the hours, followed by Alarm 1 (4) to confirm
4. Press Plus Icon (3) or Minus Icon (2) to change the minutes, followed by Alarm 1 (4) to confirm
5. Press Plus Icon (3) or Minus Icon (2) to change the alarm volume, followed by Alarm 1 (4) to confirm
6. The alarm is now set
Note: the Plus Icon (3) or Minus Icon (2) will become Next and Previous during the alarm setup in any mode.
Setting Alarm 2
1. Long press Alarm 2 (5) to start the set up
2. Press Next (3) or Previous (2) to select between Buzzer or Radio to wake you up, followed by Alarm 2 (5) to confirm
3. Press Plus Icon (3) or Minus Icon (2) to change the hours, followed by Alarm 2 (5) to confirm
4. Press Plus Icon (3) or Minus Icon (2) to change the minutes, followed by Alarm 2 (5) to confirm
5. Press Plus Icon (3) or Minus Icon (2) to change the alarm volume, followed by Alarm 2 (5) to confirm
6. The alarm is now set
11