Troubleshooting - Primada PSJ260 Instruction Manual

5. Troubleshooting

Please use this chart to troubleshoot common problems
occurring while using the product.
Problem
NO.
When there is no
1
power to the juicer
2
Low juice yield
3
There is too much
pulp in the juice
The drum lid
4
will not close
40
EN
Check if the power cord is properly plugged in.
Check if the drum lid and the juicing bowl are properly
assembled.
Check if the top-set and the base are properly assembled.
Different ingredients hold different amounts of fluid
that will yield different amounts of juice.
If the ingredients are not fresh, they may contain
reduced amounts of fluid, which will yield less juice.
Check if the silicone lip is firmly inserted (page 10).
If the ingredients have low water content, it may help
to soak them in water before juicing.
If juicing ingredients with small seeds, after a few
servings, it may reduce the juice yield. For best result,
disassemble and wash the top-set in between juicing.
If there is seed residue on the bottom of the strainer,
this can affect juicer performance and the overall juice
yield.
When continuously juicing, depending on the
ingredients, the juice may contain a lot of fine pulp.
To reduce the fine pulp, clean the top-set frequently
and the pulp. Use a mesh strainer and put the juice
through it to collect the unwanted pulp.
If the strainer and the juicing screw are damaged
and affecting the juicer 's performance, it is
recommended the parts be replaced.
Make sure the juicing screw is pushed all the way in to the
strainer in order for the drum lid to close properly.
Solution