LAMP REPLACEMENT:
1. Unplug or switch off the electricity at the mains.
2. Remove right hand end plate.
3. Gently slide out perforated / louvred aluminium grills (this is fragile so take care) and store in a
safe place.
3. Remove lamp from the spring clips and unplug the lamp connection at both ends.
4. Holding the replacement lamp with a soft cloth (do not touch with bare fingers) reinstate both the
lamp connections and fix onto the both spring clips.
5. Refit all grills previously removed.
6. Replace end plate and secure with screws and spring washers.
REPLACEMENT LAMP TYPE:
Wattage:
2000W
Supply Voltage:
240V
Type:
FA4 pin Gold halogen
EVENTUALLY, YOU MAY WANT TO REPLACE THIS LIGHT FITTING:
When your product comes to the end of its life or you choose to update or upgrade it by replacing
it, please do not dispose of it with your normal household waste and please recycle where facilities
exist. When you need to dispose of this fitting you can check with your retailer or local authority
for suitable options. New regulations require the recycling of Waste from Electrical and Electronic
Equipment (European "WEEE Directive" effective August 2005—UK WEEE Regulations effective 2nd
January 2007). Environment Agency Registered Producer: WEE/GA0248QZ.
IF YOU EXPERIENCE PROBLEMS:
If your product is defective or develops a fault, please return it to the place where you bought it.
You can call our helpline for advice. The helpline will gladly give advice on any aspect of any Eterna
Lighting product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
120106-SM
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: sales@eterna-lighting.co.uk
IP65
Visit our website:
www.eterna-lighting.co.uk
SAFETY AND INSTALLATION INSTRUCTIONS
Pack contents:
1 x heater c/w 3m mains
lead with 3-pin plug
1 x mounting bracket
2 x bolts
Model:
2 x locknuts
PAT2000W
2000W Wall Mounted Heater
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR NEW FITTING
PLEASE RETAIN FOR FUTURE REFERENCE
Need help?
Do you have a question about the PAT2000W and is the answer not in the manual?
Questions and answers