Advertisement
3. Perform the following actions to remove the top cover.
Use a Philips screwdriver to loosen the 2 screws securing the top cover and push the top
cover in the direction of the arrow below.
3. Perform the following actions to lock the left and right ear frames to the sides of the
chassis.
As shown in the figure, align the mounting holes of the left and right ear frames with the
screw holes on the left and right sides of the chassis, and then tighten the fixing screws with
a Philips screwdriver.
4. Remove inner from the middle-outer rail.
Server Rack Installation Instructions 2019/04/24
3
Advertisement
