Advertisement
KE-5
STEP 1 - The following wires MUST be connected for proper operation.
Red
12vt Power
Yellow
Ignition
White
Park Lights
Black
Ground
G reen
Lock Output
Blue
Unlock Output (-)500ma Output
Optional Connections
Orange
St.Disable (-)500ma Output Connect to Starter Disable relay.
Brown
Horn Output (-)500ma Output Connect to horn relay.
G rey
Trunk Output (-)500ma Output Connect to Trunk Release relay.
Pink
2nd Unlock (-)500ma Output Connect when installing Driver's Door Priority.
STEP 2 - CONNECT AND MOUNT THE MODULE
Plug the Connectors into the Module. Press the transmitter buttons to check for
proper operation. Once it is determined that everything is working correctly the module
can be mounted.
***Before plugging the module in make sure that Ignition Key is in the OFF position***
Mount the module by selecting a location under the dash that is secure.
Be certain that the module does not obstruct any serviceable areas. The
module must be free from moving parts such as brake, clutch and gas
pedals and the linkages that are attached to them.
Basic remote operations
Lock
Trunk
Installation Manual
(+) 15amp Input
Constant 12vt power sourse.
(+) 12volt Input
M ain ignition wire.
(+) 15amp Output Connect to positive park lights
(-) Input
Connect to chassis ground.
(-)500ma Output
Connect to door lock relay.
Connect to door unlock relay.
Unlock
See Owners Manual for more transmitter
operations
Advertisement
