TP-Link Archer A6 User Manual page 13

Chapter 2
5. Verify that the following LEDs are on and solid to confirm the hardware is connected
correctly.
Note:
If the 2.4G LED and 5G LED are off, press and hold the WPS/Wi-Fi button on the back for more than 5 seconds. Both the
LEDs should turn solid on.
6. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
LAN1 LAN2 LAN3
• Method 2: Wirelessly
1 ) Find the SSIDs (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
• Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, and most USB
network cards, can be connected to your router through this method.
Power 2.4 GHz
On On
LAN4
Connect
5 GHz Internet
On On
Ethernet cable
Smart Device
< Settings
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
TP-Link_XXXX_5G
Other...
Connect the Hardware
Wi-Fi
9