Page 1
ORIGINAL INSTRUCTIONS CAUTION – READ THESE INSTRUCTIONS BEFORE USING THE MACHINE User instructions VT12 Commercial Vacuum Cleaner 03-8220-0000 Issue 2 03/10...
Contents General information ........................3 1.1 Important Safety Advice....................3 1.2 Guidelines for the operator....................3 1.3 Transporting the machine ....................4 Preparing for use ........................4 2.1 Electrical connection ......................4 2.2 How to assemble the vacuum ..................4 2.3 Fitting the handle, wand and floor tool ................
• Do not use to pick up moisture or any liquids. proceed, contact your supervisor, supplier or • Do not leave the machine connected to the Truvox International for advice. electricity supply when not in use, always remove the plug from the socket-outlet.
• Operators should be physically capable to The power supply cord plus any extension leads should not exceed 30m in total, otherwise you manoeuvre, transport operate may experience problems starting up the machine. • Operators should be able to recognise unusual machine.
• Fit the wand to the floor tool (Fig 3) • After you finish cleaning, turn the vacuum cleaner off by pressing the ON/OFF button. • Only then unplug from the power socket. 4.2 Using the floor tool • The floor tool can be used for cleaning carpets and hard floors.
6.1 Replacing the dust bag replace free of charge to the purchaser, any part found to be defective, subject to the following • Lift the top latch on the top of the machine to conditions. release and open the top cover. •...
Sound pressure level dB(A) Weight empty Warranty 1 year 1 year Truvox International is a BSI Registered Company and our policy is one of continuous development. We reserve the right to change specifications without prior notification. 11 Accessories Accessory Part No. Description...
The EMC Directive and subsequent amendments EN61000-3-2 EN61000-3-3 EN55014-1 EN55014-2 Signed in : SOUTHAMPTON, England on the 29 day of December 2009 Signature : Name : David Overell Technical file: VT12 Iss. 1 Position : Managing Director Mark Campbell Product Support Manager...
Need help?
Do you have a question about the VT12 and is the answer not in the manual?
Questions and answers