Automatic - Manual Operation; Time Settings - Gemas Pool Control Mono Installation And Instruction Manual

4- Automatic - Manual operation

When the button is turned to "P.AUTO", the pump is
switched to automatic mode. If the '' P.ON '' status is
present, the manual mode is switched and the automatic
mode is disabled. If the button is pressed when the ''
P.OFF '' status is present, the pump is manually turned
off and the automatic mode is disabled.
When the button is turned to "L.AUTO", the light
group is switched to automatic mode. If the '' L.ON ''
status is present, the manual mode is switched and the
automatic mode is disabled. If the button is pressed
when the '' L.OFF '' status is present, the light group is
manually turned off and the automatic mode is disabled.
When the button is turned to "A.AUTO", the
additional equpment group is switched to automatic
mode. '' A.ON '' status is present, the manual mode is
switched and the automatic mode is disabled. If the
button is pressed when the '' A.OFF '' status is present,
the pump is manually turned off and the automatic
mode is disabled.

5- Time Settings

Turn the button until "SETT" appears on the display. When "SETT" appears, the button is pressed
and the hour and minute appear on the screen; Minute digit is flashing. By turning the button, the
minutes are changed and the time is set, then the setting is saved by pressing the button again.