Recipe Suggestion; Cleaning - Profi Cook PC-UM 1006 Instruction Manual

Universal mixer

Hide thumbs Also See for PC-UM 1006:

Instruction manual (78 pages)

Table of Contents

Available languages

1. Prepare the ingredients. Refer to the table on

page 45.

2. Set the mixing vessel onto the base device, if

that has not yet been done.

3. Fill the jug with the ingredients you want to mix.

4. Set the lid with the cap onto the vessel.



NOTE:

Do you want to add sugar or spices to your mixed

drink?

• First switch off the device.

• Remove the cap and fill in through the open-

ing.

• Reinsert the cap into the lid.

WARNING:

• Do not operate the mixing vessel empty or

without the lid.

• Do not reach into the mixing vessel! The

blades are sharp and rotate at high speed.

Serious injuries could result.

5. Plug the mains plug into a properly installed

earthed socket.

6. Use the "POWER" button to switch on the appli-

ance.

7. Press the "TURBO" button or select a function

using the "SELECT" button.

8. Press the "START/STOP" button after select-

ing a function. The motor starts. The remaining

operating time is shown on the display.

WARNING:

• Before cleaning always disconnect from mains power supply.

• Under no circumstances should you immerse the device in water

for cleaning purposes. Otherwise this might result in an electric

shock or fire.

• The mixer blades are sharp! Risk of injury!

End operation

1. First press the "START/STOP" button and then

the "POWER" button.

2. Wait until the mixer blade has come to a com-

plete stop.

3. First, turn the mixing vessel counterclockwise to

unlock it.

4. Lift the mixing jug off the base of the appliance

to pour out your drink.

5. Disconect the mains plug from the outlet.